On 3/31/25 5:06 PM, Gabor Juhos wrote:
The Linksys USB3GIGV1 device is a USB 3.0 Wired Gigabit Adapter supporting 10/100/1000 Mbits/sec transfer rates. It is based on RTL8153 and it works correctly with the r8152 driver:uDPU>> usb start starting USB... Bus usb@58000: Register 2000104 NbrPorts 2 Starting the controller USB XHCI 1.00 scanning bus usb@58000 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found uDPU>> usb info 1 config for device 1 2: Vendor specific, USB Revision 2.10 - Linksys Linksys USB3GIGV1 000001000000 - Class: (from Interface) Vendor specific - PacketSize: 64 Configurations: 2 - Vendor: 0x13b1 Product 0x0041 Version 48.0 Configuration: 1 - Interfaces: 1 Bus Powered Remote Wakeup 180mA Interface: 0 - Alternate Setting 0, Endpoints: 3 - Class Vendor specific - Endpoint 1 In Bulk MaxPacket 512 - Endpoint 2 Out Bulk MaxPacket 512 - Endpoint 3 In Interrupt MaxPacket 2 Interval 8ms uDPU>> dm tree usb@58000 Class Seq Probed Driver Name ----------------------------------------------------------- usb 0 [ + ] xhci_mvebu usb@58000 usb_hub 0 [ + ] usb_hub `-- usb_hub ethernet 2 [ + ] r8152_eth `-- r8152_eth bootdev 3 [ ] eth_bootdev `-- r8152_eth.bootdev uDPU>> setenv ethact r8152_eth uDPU>> setenv serverip 192.168.1.253 uDPU>> setenv ipaddr 192.168.1.1 uDPU>> ping 192.168.1.253 Using r8152_eth device host 192.168.1.253 is alive uDPU>> tftpboot 0x10000000 random.bin Using r8152_eth device TFTP from server 192.168.1.253; our IP address is 192.168.1.1 Filename 'random.bin'. Load address: 0x10000000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################################### 6.3 MiB/s done Bytes transferred = 8388608 (800000 hex) uDPU>> Add the USB id of the device to the driver to allow using it from U-Boot. Signed-off-by: Gabor Juhos <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
