Dear Eric Bénard, > this patch fix the following error : > u-boot/include/asm/arch/at91_pio.h:91: error: 'ATMEL_PIO_PORTS' undeclared > here (not in a function) > > Signed-off-by: Eric Bénard <e...@eukrea.com> > --- > arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 3 ++- > 1 files changed, 2 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c > b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c > index 6bdc75c..ace1ca8 100644 > --- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c > +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c > @@ -24,9 +24,10 @@ > > #include <common.h> > #include <asm/io.h> > +#include <asm/arch/hardware.h> > #include <asm/arch/at91_common.h> > #include <asm/arch/at91_pmc.h> > -#include <asm/arch/gpio.h> > +#include <asm/arch/at91_pio.h> > > /* > * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
at91sam9260/9g20/9xe-ek and top9000 and maybe other 9260 based boards build fine with this file as it is. If certain boards do not build with this file, their <board-config>.h is probably missing the relevant include of hardware.h. Best Regards, Reinhard _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot