On 4/11/25 18:42, Tom Rini wrote:
On Fri, Apr 11, 2025 at 05:26:55PM +0200, Cédric Le Goater wrote:
On 4/11/25 17:01, Tom Rini wrote:
On Fri, Apr 11, 2025 at 09:23:59AM +0200, Cédric Le Goater wrote:
Hi,

On 4/11/25 01:14, Tom Rini wrote:
On Fri, Apr 11, 2025 at 08:07:15AM +0930, Joel Stanley wrote:
On Mon, 7 Apr 2025 at 23:25, Eugen Hristev <[email protected]> wrote:

Hi everyone,

I keep getting an error on running the CI loop on -next on my tree :

https://source.denx.de/u-boot/custodians/u-boot-at91/-/jobs/1090517

Thanks for the report.


! _pytest.outcomes.Exit: Lab timeout: Marking connection bad - no other
tests will run !

Any clue ? It's been like this for few days. It doesn't look like a
faulty patch.

I can't see that link you sent me, it 403s.

Do you have any other traces or information to share?

It's been intermittent recently. I was able to put qemu + gdb together
and see it's one of the early initcalls that fails and hang()s but
didn't see why. You should be able to use commit 1f0281294d8b ("Merge
patch series "Annotate switch/case fallthrough cases"") as a starting
point of failure.


Do you have logs ?

Things look ok from the QEMU side (latest 10.0.0-rc and 9.1) :
      uboot_build=/path/to/u-boot/
      flashsize=65536
      flash=./flash-ast2600-evb-uboot
      dd of=$flash bs=1K if=/dev/zero count=$flashsize
      dd of=$flash conv=notrunc bs=1K if=$uboot_build/spl/u-boot-spl.bin
      dd of=$flash conv=notrunc bs=1K if=$uboot_build/u-boot.img seek=64
      $ qemu-system-arm -M ast2600-evb -net nic,netdev=net0 -netdev 
user,id=net0 -nographic -snapshot -serial mon:stdio   -drive 
file=flash-ast2600-evb-uboot,format=raw,if=mtd
      qemu-system-arm: warning: nic ftgmac100.1 has no peer
      qemu-system-arm: warning: nic ftgmac100.2 has no peer
      qemu-system-arm: warning: nic ftgmac100.3 has no peer
      U-Boot SPL 2025.04-00921-gcb7555e93075 (Apr 11 2025 - 09:08:40 +0200)
      Trying to boot from RAM
      ## Checking hash(es) for config conf-1 ... OK
      ## Checking hash(es) for Image firmware-1 ... crc32+ OK
      ## Checking hash(es) for Image fdt-1 ... crc32+ OK
      U-Boot 2025.04-00921-gcb7555e93075 (Apr 11 2025 - 09:08:40 +0200)

Please note that it's inconsistent about what commit fails. I would
expect 1f0281294d8b in U-Boot to fail but I don't know about
cb7555e93075.

Also can you please check QEMU v8.2.0? That's what we're on, and I can
try and test 9.1.3 or 10.0.0-rc and see if it's a QEMU problem instead.
Thanks!

Same result :

qemu-system-arm -M ast2600-evb -net nic,netdev=net0 -netdev user,id=net0 
-nographic -snapshot -serial mon:stdio   -drive 
file=flash-ast2600-evb-uboot,format=raw,if=mtd
qemu-system-arm: warning: nic ftgmac100.1 has no peer
qemu-system-arm: warning: nic ftgmac100.2 has no peer
qemu-system-arm: warning: nic ftgmac100.3 has no peer

U-Boot SPL 2025.04-00881-g1f0281294d8b (Apr 11 2025 - 17:23:25 +0200)
Trying to boot from RAM
## Checking hash(es) for config conf-1 ... OK
## Checking hash(es) for Image firmware-1 ... crc32+ OK
## Checking hash(es) for Image fdt-1 ... crc32+ OK


U-Boot 2025.04-00881-g1f0281294d8b (Apr 11 2025 - 17:23:25 +0200)

Model: Aspeed BMC
DRAM:  already initialized, 1008 MiB (capacity:1024 MiB, VGA:64 MiB), ECC off
Core:  266 devices, 24 uclasses, devicetree: separate
WDT:   Started watchdog@1e785000 with servicing every 1000ms (60s timeout)
MMC:   sdhci@1e750100: 0
Loading Environment from SPIFlash... SF: Detected mx25u51245g with page size 
256 Bytes, erase size 64 KiB, total 64 MiB
*** Warning - bad CRC, using default environment

In:    serial@1e784000
Out:   serial@1e784000
Err:   serial@1e784000
Net:   eth0: ftgmac@1e660000, eth1: ftgmac@1e680000, eth2: ftgmac@1e670000, 
eth3: ftgmac@1e690000
Hit any key to stop autoboot:  0
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Error loading kernel FIT image
=> QEMU 8.2.10 monitor - type 'help' for more information
(qemu) q


What about the compiler ?

It's:
https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/13.2.0/x86_64-gcc-13.2.0-nolibc-aarch64-linux.tar.xz


1f0281294d8b fails to compile :

  cc1: error: unknown value 'generic-armv7-a' for '-mtune'

I use most of the time :

arm-none-eabi-gcc (Fedora 14.1.0-2.fc41) 14.1.0

Thanks,

C.

Reply via email to