Hello Marex, Fabio, all
On Sun, Mar 23, 2025 at 04:58:45PM +0100, Marek Vasut wrote:
> Convert clock-osc-24m back to osc_24m and clock-osc-32k back to osc_32k.
> These are the clock which match clock tables in Linux. This is now
> possible because the clock drivers now resolve clock names based on
> clock-names DT property in the CCM DT node.
>
> Signed-off-by: Marek Vasut <[email protected]>
Current USB fastboot functionality from U-Boot proper in master is broken
on Verdin iMX8M Plus since commit b4734c9c333b ("clk: imx: Convert
clock-osc-* back to osc_*"). Other i.MX SoCs might be affected, I have
not looked into every detail.
Could not fetch index
Failed to get PHY0 for usb@38100000
Could not fetch index
Failed to get PHY0 for usb@38100000
No USB device found
USB init failed: -19
Reverting this commit on top of master is not trivial (there are
conflicts, and I have not looked into the details).
Full log for reference
U-Boot SPL 2025.04-rc4-00537-gb4734c9c333b (Apr 15 2025 - 16:14:09 +0200)
Training FAILED
DDR configured as single rank
WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout)
SEC0: RNG instantiated
Normal Boot
Trying to boot from BOOTROM
Boot Stage: USB boot
Find img info 0x4802ec00, size 1116
Need continue download 1024
NOTICE: Do not release JR0 to NS as it can be used by HAB
NOTICE: BL31: v2.12.0(release):v2.12.0-946-g4d913df8f85e
NOTICE: BL31: Built : 13:19:07, Apr 15 2025
U-Boot 2025.04-rc4-00537-gb4734c9c333b (Apr 15 2025 - 16:14:09 +0200)
CPU: Freescale i.MX8MP[8] rev1.1 1600 MHz (running at 1200 MHz)
CPU: Industrial temperature grade (-40C to 105C) at 56C
Reset cause: POR
DRAM: 4 GiB
Core: 309 devices, 31 uclasses, devicetree: separate
WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout)
MMC: FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from nowhere... OK
In: serial@30880000
Out: serial@30880000
Err: serial@30880000
Model: Toradex 0058 Verdin iMX8M Plus Quad 4GB WB IT V1.0B
Serial#: 06849144
Carrier: Toradex Dahlia V1.1A, Serial# 10763256
SEC0: RNG instantiated
Setting variant to wifi
Net: pca953x gpio-expander@21: Error reading output register
eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME]
Hit any key to stop autoboot: 0
Could not fetch index
Failed to get PHY0 for usb@38100000
Could not fetch index
Failed to get PHY0 for usb@38100000
No USB device found
USB init failed: -19
Verdin iMX8MP #
Any suggestion?
Francesco
