From: Jason Cooper <u-b...@lakedaemon.net>
It compiles clean, and I've loaded it via JTAG and used it to dump the
existing bootloader out of the SPI flash. I have _not_ used it to burn
itself to the flash yet. I'm looking for comments before I try that. ;-)
Some concerns:
- The SPI flash chip is a Macronix MX25L1606, however it has the
identical chip idcode to the MX25L1605. How is that properly
handled? The 06 does have some new features [1].
[1]
http://www.macronix.com/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/5F41CDDCB837422C48257639003E5EC3/$File/AN055-Migrate_to_MX25L1606E_and_MX25L8006E-1.2.pdf
Changes from v1 to v2:
- resorted series to move 'make all' support last.
Changes from v2 to v3:
- Use MACH_TYPE_GURUPLUG for now until dreamplug support is in Linux.
- Update MAINTAINERS.
- Collapse into one patch
Jason Cooper (1):
dreamplug: Initial support.
MAINTAINERS | 1 +
MAKEALL | 1 +
board/Marvell/dreamplug/Makefile | 51 +++++++++++
board/Marvell/dreamplug/dreamplug.c | 154 ++++++++++++++++++++++++++++++++
board/Marvell/dreamplug/dreamplug.h | 39 ++++++++
board/Marvell/dreamplug/kwbimage.cfg | 160 ++++++++++++++++++++++++++++++++++
boards.cfg | 1 +
include/configs/dreamplug.h | 111 +++++++++++++++++++++++
8 files changed, 518 insertions(+), 0 deletions(-)
create mode 100644 board/Marvell/dreamplug/Makefile
create mode 100644 board/Marvell/dreamplug/dreamplug.c
create mode 100644 board/Marvell/dreamplug/dreamplug.h
create mode 100644 board/Marvell/dreamplug/kwbimage.cfg
create mode 100644 include/configs/dreamplug.h
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
