This patch fixed compiler errors due to missing definitions of
CONFIG_SYS_SDRAM_BASE and CONFIG_SYS_INIT_SP_ADDR.
The board doesn't start, though. A v2 of this patch or a seperate patch
will fix the error when it was found.
Signed-off-by: Torsten Koschorrek <koschor...@synertronixx.de>
---
board/scb9328/config.mk | 2 +-
board/scb9328/scb9328.c | 10 +++++++++-
include/configs/scb9328.h | 3 +++
3 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/board/scb9328/config.mk b/board/scb9328/config.mk
index 7c5e067..6e411de 100644
--- a/board/scb9328/config.mk
+++ b/board/scb9328/config.mk
@@ -7,4 +7,4 @@
# the code in RAM device only.
#
-CONFIG_SYS_TEXT_BASE = 0x08f00000
+CONFIG_SYS_TEXT_BASE = 0x10000000
diff --git a/board/scb9328/scb9328.c b/board/scb9328/scb9328.c
index 428e8c9..631f4e3 100644
--- a/board/scb9328/scb9328.c
+++ b/board/scb9328/scb9328.c
@@ -39,6 +39,15 @@ int board_init (void)
int dram_init (void)
{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size((volatile void *)SCB9328_SDRAM_1,
+ SCB9328_SDRAM_1_SIZE);
+
+ return 0;
+}
+
+void dram_init_banksize (void)
+{
#if ( CONFIG_NR_DRAM_BANKS > 0 )
gd->bd->bi_dram[0].start = SCB9328_SDRAM_1;
gd->bd->bi_dram[0].size = SCB9328_SDRAM_1_SIZE;
@@ -55,7 +64,6 @@ int dram_init (void)
gd->bd->bi_dram[3].start = SCB9328_SDRAM_4;
gd->bd->bi_dram[3].size = SCB9328_SDRAM_4_SIZE;
#endif
- return 0;
}
/**
diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
index 3da214e..c610ed1 100644
--- a/include/configs/scb9328.h
+++ b/include/configs/scb9328.h
@@ -127,6 +127,9 @@
#define SCB9328_SDRAM_1 0x08000000 /* SDRAM bank #1
*/
#define SCB9328_SDRAM_1_SIZE 0x01000000 /* 16 MB */
+#define CONFIG_SYS_SDRAM_BASE SCB9328_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR SCB9328_SDRAM_1 + 0xf00000
+
/*
* Configuration for FLASH memory for the Synertronixx board
*/
--
1.7.2.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
