On Thu, 29 May 2025 17:02:13 +0200, Richard Weinberger wrote:
> Although if we we don't setup an initrd, there could be a stale
> initrd setting from the previous boot firmware in the live
> device tree. So, make sure there is no setting left if we
> don't want an initrd.
>
> This can happen when booting on a Raspberry Pi. The boot firmware
> can happily load an initrd before us and configuring the addresses
> in the live device tree we get handed over.
>
> [...]
Applied to u-boot/next, thanks!
[1/1] fdt: Make sure there is no stale initrd left
commit: 9fe2e4b46458f9c4ec6b8115ebf18b4b26fe6127
--
Tom
