With this, the EHCI seems to "recover" from a timeout. This is particularly
observable if you were to ping the wrong IP Address and then ping the correct
one or if there was a temporary failure during tftp sessions.
All it takes is one timeout to disable it. If you have a noisy network (lot
of traffic), even if the traffic is not for the board, the timeouts don't occur.
Signed-off-by: Joel A Fernandes <agnel.j...@gmail.com>
---
Robert, Could you see if this patch solves the issue you're seeing without
increasing the timeout?
Simon, Could this be a fix for a similar issue you were seeing with asix?
drivers/usb/host/ehci-hcd.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 243bb39..9bfcbae 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -464,7 +464,6 @@ ehci_submit_async(struct usb_device *dev, unsigned long
pipe, void *buffer,
/* Check that the TD processing happened */
if (token & 0x80) {
printf("EHCI timed out on TD - token=%#x\n", token);
- goto fail;
}
/* Disable async schedule. */
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
