There is no need to use set_timer(). Replace with appropriate use of
get_timer()

Signed-off-by: Graeme Russ <graeme.r...@gmail.com>

---
 board/BuS/EB+MCF-EV123/flash.c |   10 ++++++----
 board/cobra5272/flash.c        |   10 ++++++----
 board/idmr/flash.c             |   10 ++++++----
 3 files changed, 18 insertions(+), 12 deletions(-)

diff --git a/board/BuS/EB+MCF-EV123/flash.c b/board/BuS/EB+MCF-EV123/flash.c
index 3c36367..8b7f957 100644
--- a/board/BuS/EB+MCF-EV123/flash.c
+++ b/board/BuS/EB+MCF-EV123/flash.c
@@ -157,6 +157,7 @@ int amd_flash_erase_sector(flash_info_t * info, int sector)
 {
        int state;
        ulong result;
+       ulong start;

        volatile u16 *addr =
                                (volatile u16 *) (info->start[sector]);
@@ -171,13 +172,13 @@ int amd_flash_erase_sector(flash_info_t * info, int 
sector)

        /* wait until flash is ready */
        state = 0;
-       set_timer (0);
+       start = get_timer(0);

        do {
                result = *addr;

                /* check timeout */
-               if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
+               if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
                        MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
                        state = ERR_TIMOUT;
                }
@@ -267,6 +268,7 @@ volatile static int amd_write_word (flash_info_t * info, 
ulong dest, u16 data)
        ulong result;
        int cflag, iflag;
        int state;
+       ulong start;

        /*
         * Check if Flash is (sufficiently) erased
@@ -295,7 +297,7 @@ volatile static int amd_write_word (flash_info_t * info, 
ulong dest, u16 data)
        *addr = data;

        /* arm simple, non interrupt dependent timer */
-       set_timer (0);
+       start = get_timer(0);

        /* wait until flash is ready */
        state = 0;
@@ -303,7 +305,7 @@ volatile static int amd_write_word (flash_info_t * info, 
ulong dest, u16 data)
                result = *addr;

                /* check timeout */
-               if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
+               if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
                                state = ERR_TIMOUT;
                }
                if (!state && ((result & BIT_RDY_MASK) == (data & 
BIT_RDY_MASK)))
diff --git a/board/cobra5272/flash.c b/board/cobra5272/flash.c
index 33c9361..e8f02eb 100644
--- a/board/cobra5272/flash.c
+++ b/board/cobra5272/flash.c
@@ -147,6 +147,7 @@ int flash_erase (flash_info_t * info, int s_first, int 
s_last)
        int iflag, cflag, prot, sect;
        int rc = ERR_OK;
        int chip1;
+       ulong start;

        /* first look for protection bits */

@@ -190,7 +191,7 @@ int flash_erase (flash_info_t * info, int s_first, int 
s_last)
                printf ("Erasing sector %2d ... ", sect);

                /* arm simple, non interrupt dependent timer */
-               set_timer (0);
+               start = get_timer(0);

                if (info->protect[sect] == 0) { /* not protected */
                        volatile u16 *addr =
@@ -211,7 +212,7 @@ int flash_erase (flash_info_t * info, int s_first, int 
s_last)
                                result = *addr;

                                /* check timeout */
-                               if (get_timer (0) > 
CONFIG_SYS_FLASH_ERASE_TOUT) {
+                               if (get_timer(start) > 
CONFIG_SYS_FLASH_ERASE_TOUT) {
                                        MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
                                        chip1 = TMO;
                                        break;
@@ -264,6 +265,7 @@ static int write_word (flash_info_t * info, ulong dest, 
ulong data)
        int rc = ERR_OK;
        int cflag, iflag;
        int chip1;
+       ulong start;

        /*
         * Check if Flash is (sufficiently) erased
@@ -291,7 +293,7 @@ static int write_word (flash_info_t * info, ulong dest, 
ulong data)
        *addr = data;

        /* arm simple, non interrupt dependent timer */
-       set_timer (0);
+       start = get_timer(0);

        /* wait until flash is ready */
        chip1 = 0;
@@ -299,7 +301,7 @@ static int write_word (flash_info_t * info, ulong dest, 
ulong data)
                result = *addr;

                /* check timeout */
-               if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
+               if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
                        chip1 = ERR | TMO;
                        break;
                }
diff --git a/board/idmr/flash.c b/board/idmr/flash.c
index 57c9948..9f4ff2b 100644
--- a/board/idmr/flash.c
+++ b/board/idmr/flash.c
@@ -130,6 +130,7 @@ int flash_erase (flash_info_t * info, int s_first, int 
s_last)
        int iflag, prot, sect;
        int rc = ERR_OK;
        int chip1;
+       ulong start;

        /* first look for protection bits */

@@ -170,7 +171,7 @@ int flash_erase (flash_info_t * info, int s_first, int 
s_last)
                printf ("Erasing sector %2d ... ", sect);

                /* arm simple, non interrupt dependent timer */
-               set_timer (0);
+               start = get_timer(0);

                if (info->protect[sect] == 0) { /* not protected */
                        volatile u16 *addr =
@@ -191,7 +192,7 @@ int flash_erase (flash_info_t * info, int s_first, int 
s_last)
                                result = *addr;

                                /* check timeout */
-                               if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT 
* CONFIG_SYS_HZ / 1000) {
+                               if (get_timer(start) > 
CONFIG_SYS_FLASH_ERASE_TOUT * CONFIG_SYS_HZ / 1000) {
                                        MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
                                        chip1 = TMO;
                                        break;
@@ -248,6 +249,7 @@ static int write_word (flash_info_t * info, ulong dest, 
ulong data)
        int rc = ERR_OK;
        int iflag;
        int chip1;
+       ulong start;

        /*
         * Check if Flash is (sufficiently) erased
@@ -272,7 +274,7 @@ static int write_word (flash_info_t * info, ulong dest, 
ulong data)
        *addr = data;

        /* arm simple, non interrupt dependent timer */
-       set_timer (0);
+       start = get_timer(0);

        /* wait until flash is ready */
        chip1 = 0;
@@ -280,7 +282,7 @@ static int write_word (flash_info_t * info, ulong dest, 
ulong data)
                result = *addr;

                /* check timeout */
-               if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT * CONFIG_SYS_HZ 
/ 1000) {
+               if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT * 
CONFIG_SYS_HZ / 1000) {
                        chip1 = ERR | TMO;
                        break;
                }
--
1.7.5.2.317.g391b14

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to