[PATCH] mtd: spi-nor: add support for XMC XM25QH256D/XM25QH512D

[Ssunk]

The XMC XM25QH256D and XM25QH512D share the same JEDEC ID
with their C-version counterparts (XM25QH256C and XM25QH512C).
To properly distinguish them, the BFPT DTR bit needs to be
checked. If DTR is set, the device is identified as the D
version instead of the C version.

This patch:
- Adds CONFIG_SPI_FLASH_XMC to reuse Spansion/Winbond code paths
  for configuration register handling and quad enable logic.
- Extends spi_nor_parse_bfpt() to check DTR and rename the device
  from "C" to "D" when required.
- Ensures spi_nor_init_params() keeps the correct flash name.

Signed-off-by: Ssunk <ssunk...@gmail.com>
---
 drivers/mtd/spi/spi-nor-core.c | 30 +++++++++++++++++++++++++-----
 1 file changed, 25 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
index 76c33b24368..a00d82057da 100644
--- a/drivers/mtd/spi/spi-nor-core.c
+++ b/drivers/mtd/spi/spi-nor-core.c
@@ -578,7 +578,7 @@ static int read_fsr(struct spi_nor *nor)
  * location. Return the configuration register value.
  * Returns negative if error occurred.
  */
-#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
+#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND) || 
defined(CONFIG_SPI_FLASH_XMC)
 static int read_cr(struct spi_nor *nor)
 {
        int ret;
@@ -2204,7 +2204,7 @@ static int spansion_quad_enable_volatile(struct spi_nor 
*nor, u32 addr_base,
 }
 #endif
 
-#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
+#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND) || 
defined(CONFIG_SPI_FLASH_XMC)
 /*
  * Write status Register and configuration register with 2 bytes
  * The first byte will be written to the status register, while the
@@ -2630,6 +2630,21 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
                break;
        }
 
+       if (strcmp(mtd->name, "XM25QH512C") == 0)
+       {
+               if (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_DTR)
+               {
+                       mtd->name = "XM25QH512D";
+               }
+       }
+       if (strcmp(mtd->name, "XM25QH256C") == 0)
+       {
+               if (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_DTR)
+               {
+                       mtd->name = "XM25QH256D";
+               }
+       }
+
        /* Flash Memory Density (in bits). */
        params->size = bfpt.dwords[BFPT_DWORD(2)];
        if (params->size & BIT(31)) {
@@ -2710,7 +2725,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
        case BFPT_DWORD15_QER_NONE:
                params->quad_enable = NULL;
                break;
-#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
+#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND) || 
defined(CONFIG_SPI_FLASH_XMC)
        case BFPT_DWORD15_QER_SR2_BIT1_BUGGY:
        case BFPT_DWORD15_QER_SR2_BIT1_NO_RD:
                params->quad_enable = spansion_no_read_cr_quad_enable;
@@ -2721,7 +2736,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
                params->quad_enable = macronix_quad_enable;
                break;
 #endif
-#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
+#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND) || 
defined(CONFIG_SPI_FLASH_XMC)
        case BFPT_DWORD15_QER_SR2_BIT1:
                params->quad_enable = spansion_read_cr_quad_enable;
                break;
@@ -3094,6 +3109,11 @@ static int spi_nor_init_params(struct spi_nor *nor,
 #endif
        }
 
+#ifdef CONFIG_SPI_FLASH_XMC
+       if (JEDEC_MFR(info) == SNOR_MFR_ST) 
+               nor->mtd.name = info->name;
+#endif
+
        /* (Fast) Read settings. */
        params->hwcaps.mask |= SNOR_HWCAPS_READ;
        spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ],
@@ -3166,7 +3186,7 @@ static int spi_nor_init_params(struct spi_nor *nor,
                        break;
 
                default:
-#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
+#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND) || 
defined(CONFIG_SPI_FLASH_XMC)
                        /* Kept only for backward compatibility purpose. */
                        params->quad_enable = spansion_read_cr_quad_enable;
 #endif
-- 
2.34.1