Implement get_reset_reason() for AM64x to enable reporting of the reset cause in the cpuinfo output.
Notice that the AM64x does not support dedicated reset cause bits for WDT and PORZ as the AM62x does. An explanation of this difference is not part of the technical reference manual and remains unclear. Signed-off-by: Steffen Kothe <[email protected]> --- arch/arm/mach-k3/am64x/boot.c | 36 +++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/mach-k3/am64x/boot.c b/arch/arm/mach-k3/am64x/boot.c index ce8ae941be6..f88f92b9f23 100644 --- a/arch/arm/mach-k3/am64x/boot.c +++ b/arch/arm/mach-k3/am64x/boot.c @@ -103,3 +103,39 @@ u32 get_boot_device(void) return bootmedia; } + +const char *get_reset_reason(void) +{ + u32 reset_reason = readl(CTRLMMR_MCU_RST_SRC); + + /* After reading reset source register, software must clear it */ + if (reset_reason) + writel(reset_reason, CTRLMMR_MCU_RST_SRC); + + if (reset_reason == 0 || + (reset_reason & (RST_SRC_SW_MAIN_POR_FROM_MAIN | + RST_SRC_SW_MAIN_POR_FROM_MCU))) + return "POR"; + + if (reset_reason & (RST_SRC_SAFETY_ERR | RST_SRC_MAIN_ESM_ERR)) + return "ESM"; + + if (reset_reason & (RST_SRC_SW_MAIN_WARM_FROM_MAIN | + RST_SRC_SW_MAIN_WARM_FROM_MCU | + RST_SRC_SW_MCU_WARM_RST)) + return "RST"; + + if (reset_reason & (RST_SRC_SMS_WARM_RST | RST_SRC_SMS_COLD_RST)) + return "DMSC"; + + if (reset_reason & RST_SRC_DEBUG_RST) + return "JTAG"; + + if (reset_reason & RST_SRC_THERMAL_RST) + return "THERMAL"; + + if (reset_reason & (RST_SRC_MAIN_RESET_PIN | RST_SRC_MCU_RESET_PIN)) + return "PIN"; + + return "UNKNOWN"; +} -- 2.51.0
