On Tue, Sep 09, 2025 at 11:04:24AM +0530, Paresh Bhagat wrote: > The AM62D2 SoC, part of the K3 architecture, is built for high-performance > DSP tasks in automotive audio, pro audio, radar, sonar, and medical > imaging. It features up to four Cortex-A53 cores (1.4GHz), two Cortex-R5F > cores, and a C7x DSP with 2 TOPS MMA. Key interfaces include multi-channel > McASP audio, TSN-capable Gigabit Ethernet, and a range of peripherals > (UART, SPI, I2C, CAN, USB, eMMC/SD, OSPI, CSI). It supports LPDDR4/DDR4, > secure boot with hardware security, and low-power modes with > CAN/GPIO/UART wakeup. [snip] > arch/arm/dts/Makefile | 2 + > arch/arm/dts/k3-am62d-ddr-1866mhz-32bit.dtsi | 2802 ++++++++++++++++++ > arch/arm/dts/k3-am62d-evm-binman.dtsi | 262 ++ > arch/arm/dts/k3-am62d2-evm-u-boot.dtsi | 14 + > arch/arm/dts/k3-am62d2-r5-evm.dts | 82 + > arch/arm/mach-k3/am62ax/Kconfig | 25 + > board/ti/am62dx/Kconfig | 26 + > board/ti/am62dx/MAINTAINERS | 8 + > board/ti/am62dx/Makefile | 7 + > board/ti/am62dx/am62dx.env | 21 + > board/ti/am62dx/board-cfg.yaml | 36 + > board/ti/am62dx/evm.c | 37 + > board/ti/am62dx/pm-cfg.yaml | 12 + > board/ti/am62dx/rm-cfg.yaml | 1047 +++++++ > board/ti/am62dx/sec-cfg.yaml | 379 +++ > board/ti/am62dx/tifs-rm-cfg.yaml | 903 ++++++ > configs/am62dx_evm_a53_defconfig | 22 + > configs/am62dx_evm_r5_defconfig | 20 + > 18 files changed, 5705 insertions(+) > create mode 100644 arch/arm/dts/k3-am62d-ddr-1866mhz-32bit.dtsi > create mode 100644 arch/arm/dts/k3-am62d-evm-binman.dtsi > create mode 100644 arch/arm/dts/k3-am62d2-evm-u-boot.dtsi > create mode 100644 arch/arm/dts/k3-am62d2-r5-evm.dts > create mode 100644 board/ti/am62dx/Kconfig > create mode 100644 board/ti/am62dx/MAINTAINERS > create mode 100644 board/ti/am62dx/Makefile > create mode 100644 board/ti/am62dx/am62dx.env > create mode 100644 board/ti/am62dx/board-cfg.yaml > create mode 100644 board/ti/am62dx/evm.c > create mode 100644 board/ti/am62dx/pm-cfg.yaml > create mode 100644 board/ti/am62dx/rm-cfg.yaml > create mode 100644 board/ti/am62dx/sec-cfg.yaml > create mode 100644 board/ti/am62dx/tifs-rm-cfg.yaml > create mode 100644 configs/am62dx_evm_a53_defconfig > create mode 100644 configs/am62dx_evm_r5_defconfig
This isn't architecture and board, it's just a board, it should be a single patch. In that some of these yaml files are big, it would be good to figure out as a generic problem how to reduce that if possible (I don't know if it is). -- Tom
signature.asc
Description: PGP signature
