On Tue, Oct 14, 2025 at 11:28 AM Yegor Yefremov <[email protected]> wrote: > > Hi Anshul, Tom, > > On Tue, Oct 14, 2025 at 5:58 AM Anshul Dalal <[email protected]> wrote: > > > > Hi Yegor, > > > > On Mon Oct 13, 2025 at 6:39 PM IST, yegorslists wrote: > > > From: Yegor Yefremov <[email protected]> > > > > > > > Could you explain a bit more about why this change is needed in the > > commit description? > > Both are required for GPIO drivers to work. At least, for the OF setup. > > Should I add this description or can we embed them as dependencies for > CONFIG_OMAP_GPIO?
This is what I get when TI_SYSC is enabled but CONFIG_CLK_TI_CTRL driver not: ti_sysc target-module@7000: failed to get fck clock ti_sysc target-module@4c000: failed to get fck clock ti_sysc target-module@ac000: failed to get fck clock ti_sysc target-module@ae000: failed to get fck clock If only TI_SYSC is missing, then GPIO won't work but without any error output. P.S. I still don't have an answer to this question [1] [1] https://lists.denx.de/pipermail/u-boot/2025-September/599390.html > Regards, > Yegor > > > Regards, > > Anshul > > > > > Signed-off-by: Yegor Yefremov <[email protected]> > > > --- > > > configs/am335x_baltos_defconfig | 3 ++- > > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > > > diff --git a/configs/am335x_baltos_defconfig > > > b/configs/am335x_baltos_defconfig > > > index 5c43503ff32..93a5fb94adf 100644 > > > --- a/configs/am335x_baltos_defconfig > > > +++ b/configs/am335x_baltos_defconfig > > > @@ -53,8 +53,9 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y > > > CONFIG_VERSION_VARIABLE=y > > > CONFIG_NET_RETRY_COUNT=10 > > > CONFIG_BOOTP_SEND_HOSTNAME=y > > > -# CONFIG_TI_SYSC is not set > > > CONFIG_BOOTCOUNT_LIMIT=y > > > +CONFIG_CLK=y > > > +CONFIG_CLK_TI_CTRL=y > > > CONFIG_DM_I2C=y > > > CONFIG_SPL_SYS_I2C_LEGACY=y > > > CONFIG_SYS_I2C_EEPROM_ADDR=0x50 > >
