From: Frieder Schrempf <[email protected]> Enable config options to access the EEPROM on the OSM-S i.MX8MM SoM module.
Signed-off-by: Frieder Schrempf <[email protected]> --- configs/kontron-sl-mx8mm_defconfig | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/configs/kontron-sl-mx8mm_defconfig b/configs/kontron-sl-mx8mm_defconfig index 71dde10ee4f..f11e58a8433 100644 --- a/configs/kontron-sl-mx8mm_defconfig +++ b/configs/kontron-sl-mx8mm_defconfig @@ -60,6 +60,11 @@ CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x58000 CONFIG_SPL_WATCHDOG=y CONFIG_CMD_NVEDIT_EFI=y +CONFIG_CMD_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 +CONFIG_SYS_EEPROM_SIZE=8192 +CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 +CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=6 # CONFIG_CMD_LZMADEC is not set CONFIG_CMD_CLK=y CONFIG_CMD_DFU=y @@ -100,6 +105,9 @@ CONFIG_CLK_IMX8MM=y CONFIG_DFU_SF=y CONFIG_MXC_GPIO=y CONFIG_DM_I2C=y +CONFIG_I2C_EEPROM=y +CONFIG_SPL_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x50 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y -- 2.51.0
