Please also replace spaces with tab where possible
On 10/30/25 22:07, Tianling Shen wrote: > [You don't often get email from [email protected]. Learn why this is important > at https://aka.ms/LearnAboutSenderIdentification ] > > Add support for FudanMicro FM25S01A SPI NAND. > > This driver is ported from linux v6.18 and tested on a MT7981 board. > > Link: > https://lore.kernel.org/linux-mtd/[email protected]/ > Signed-off-by: Tianling Shen <[email protected]> > --- > drivers/mtd/nand/spi/Makefile | 2 +- > drivers/mtd/nand/spi/fmsh.c | 76 +++++++++++++++++++++++++++++++++++ > 2 files changed, 77 insertions(+), 1 deletion(-) > create mode 100644 drivers/mtd/nand/spi/fmsh.c > > diff --git a/drivers/mtd/nand/spi/Makefile b/drivers/mtd/nand/spi/Makefile > index 152aa1a3783c..a7a0b2cb4b9e 100644 > --- a/drivers/mtd/nand/spi/Makefile > +++ b/drivers/mtd/nand/spi/Makefile > @@ -1,6 +1,6 @@ > # SPDX-License-Identifier: GPL-2.0 > > spinand-objs := core.o otp.o > -spinand-objs += alliancememory.o ato.o esmt.o foresee.o gigadevice.o > macronix.o > +spinand-objs += alliancememory.o ato.o esmt.o fmsh.o foresee.o gigadevice.o > macronix.o > spinand-objs += micron.o paragon.o skyhigh.o toshiba.o winbond.o xtx.o > obj-$(CONFIG_MTD_SPI_NAND) += spinand.o > diff --git a/drivers/mtd/nand/spi/fmsh.c b/drivers/mtd/nand/spi/fmsh.c > new file mode 100644 > index 000000000000..84a567919ebb > --- /dev/null > +++ b/drivers/mtd/nand/spi/fmsh.c > @@ -0,0 +1,76 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2020-2021 Rockchip Electronics Co., Ltd. > + * > + * Author: Dingqiang Lin <[email protected]> > + */ > + > +#ifndef __UBOOT__ > +#include <linux/device.h> > +#include <linux/kernel.h> > +#endif > +#include <linux/mtd/spinand.h> > + > +#define SPINAND_MFR_FMSH 0xA1 > + > +static SPINAND_OP_VARIANTS(read_cache_variants, > + SPINAND_PAGE_READ_FROM_CACHE_1S_4S_4S_OP(0, 2, NULL, 0, 0), > + SPINAND_PAGE_READ_FROM_CACHE_1S_1S_4S_OP(0, 1, NULL, 0, 0), > + SPINAND_PAGE_READ_FROM_CACHE_1S_2S_2S_OP(0, 1, NULL, 0, 0), > + SPINAND_PAGE_READ_FROM_CACHE_1S_1S_2S_OP(0, 1, NULL, 0, 0), > + SPINAND_PAGE_READ_FROM_CACHE_FAST_1S_1S_1S_OP(0, 1, NULL, 0, > 0), > + SPINAND_PAGE_READ_FROM_CACHE_1S_1S_1S_OP(0, 1, NULL, 0, 0)); > + > +static SPINAND_OP_VARIANTS(write_cache_variants, > + SPINAND_PROG_LOAD_1S_1S_4S_OP(true, 0, NULL, 0), > + SPINAND_PROG_LOAD_1S_1S_1S_OP(true, 0, NULL, 0)); > + > +static SPINAND_OP_VARIANTS(update_cache_variants, > + SPINAND_PROG_LOAD_1S_1S_4S_OP(false, 0, NULL, 0), > + SPINAND_PROG_LOAD_1S_1S_1S_OP(false, 0, NULL, 0)); > + > +static int fm25s01a_ooblayout_ecc(struct mtd_info *mtd, int section, > + struct mtd_oob_region *region) > +{ > + return -ERANGE; > +} > + > +static int fm25s01a_ooblayout_free(struct mtd_info *mtd, int section, > + struct mtd_oob_region *region) > +{ > + if (section) > + return -ERANGE; > + > + region->offset = 2; > + region->length = 62; > + > + return 0; > +} > + > +static const struct mtd_ooblayout_ops fm25s01a_ooblayout = { > + .ecc = fm25s01a_ooblayout_ecc, > + .rfree = fm25s01a_ooblayout_free, > +}; > + > +static const struct spinand_info fmsh_spinand_table[] = { > + SPINAND_INFO("FM25S01A", > + SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xE4), > + NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1), > + NAND_ECCREQ(1, 512), > + SPINAND_INFO_OP_VARIANTS(&read_cache_variants, > + &write_cache_variants, > + &update_cache_variants), > + SPINAND_HAS_QE_BIT, > + SPINAND_ECCINFO(&fm25s01a_ooblayout, NULL)), > +}; > + > +static const struct spinand_manufacturer_ops fmsh_spinand_manuf_ops = { > +}; > + > +const struct spinand_manufacturer fmsh_spinand_manufacturer = { > + .id = SPINAND_MFR_FMSH, > + .name = "Fudan Micro", > + .chips = fmsh_spinand_table, > + .nchips = ARRAY_SIZE(fmsh_spinand_table), > + .ops = &fmsh_spinand_manuf_ops, > +}; > -- > 2.51.1 >
