This config option is required to make use of a newer pinctrl driver on exynos 5 platforms. It is enabled per default to ensure older devices can still use this driver.
Signed-off-by: Lukas Timmermann <[email protected]> --- Changes since v1: - Reworded comment for Kconfig (@Hendrik) arch/arm/mach-exynos/pinmux.c | 18 ++++++++++++++++++ drivers/gpio/Kconfig | 7 +++++++ drivers/gpio/Makefile | 2 +- 3 files changed, 26 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/pinmux.c b/arch/arm/mach-exynos/pinmux.c index ed46ea03355..2665aeee6d2 100644 --- a/arch/arm/mach-exynos/pinmux.c +++ b/arch/arm/mach-exynos/pinmux.c @@ -934,3 +934,21 @@ int pinmux_decode_periph_id(const void *blob, int node) return PERIPH_ID_NONE; } #endif + +#if !CONFIG_IS_ENABLED(S5P_GPIO) + +/* Add stub functions if s5p_gpio driver isn't enabled */ + +void gpio_set_pull(int pin, int pull) +{ +} + +void gpio_set_drv(int pin, int drv) +{ +} + +void gpio_cfg_pin(int pin, int cfg) +{ +} + +#endif diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index db077e472a8..8c93a850611 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -718,5 +718,12 @@ config MPFS_GPIO depends on DM_GPIO help Enable to support the GPIO driver on Polarfire SoC +config S5P_GPIO + default y + bool "Samsung S5P GPIO driver" + depends on DM_GPIO && S5P + help + Support GPIO controllers on Samsung Exynos SoCs. + This driver does not support upstream Linux device tree bindings. endif diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 73c94329e36..a26ef5a0371 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -35,7 +35,7 @@ obj-$(CONFIG_PCA953X) += pca953x.o obj-$(CONFIG_ROCKCHIP_GPIO) += rk_gpio.o obj-$(CONFIG_RCAR_GPIO) += gpio-rcar.o obj-$(CONFIG_RZA1_GPIO) += gpio-rza1.o -obj-$(CONFIG_S5P) += s5p_gpio.o +obj-$(CONFIG_S5P_GPIO) += s5p_gpio.o obj-$(CONFIG_SANDBOX_GPIO) += sandbox.o sandbox_test.o obj-$(CONFIG_TEGRA_GPIO) += tegra_gpio.o obj-$(CONFIG_TEGRA186_GPIO) += tegra186_gpio.o -- 2.51.2
