Hi Fabio, On 08/07/11 12:54, Fabio Estevam wrote: > Just to make sure I understand: you want to boot MX25 from internal > mode (from ROM), correct?
Yes, I am booting in internal mode, so that I can load U-Boot from NAND (or SPI flash). > We currently do this on the MX51 and we pass the DDR timings, IOMUX, > etc via the DCD (Device Configuration Data) mechanism. > > You can refer to: board/freescale/mx51evk/imximage.cfg > > I plan to work on adding support for MX25PDK board and I would like to > get it to boot from internal mode (NAND and SD card), but this will > take some time as I will be out for one month. > > Would be interested to know whether you get any progress on this side. I essentially have it working on 2011.06 from NAND. However I wouldn't guarantee that the code is necessarily suitable for the main tree. I have done it via the #include method previously mentioned. Just out of interest, how does the imximage.cfg file work? I can't see any reference to that file in any of the build system, so how do you get it prepended to the image? Regards, Andre -- Bluewater Systems - An Aiotec Company Andre Renaud an...@bluewatersys.com 5 Amuri Park, 404 Barbadoes St www.bluewatersys.com PO Box 13 889, Christchurch 8013 www.aiotec.co.nz New Zealand Phone: +64 3 3779127 Freecall: Australia 1800 148 751 Fax: +64 3 3779135 USA 1800 261 2934 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
