Dear smitha.va...@wipro.com, In message <07acdfb8eca8ef47863a613bc01bbb2203243...@hyd-mkd-mbx02.wipro.com> you wrote: > > I am trying to bring up u-boot1.1.3 on a custom mpc8247 board, having > 32MB flash and two 32 M SDRAM . > > See a problem after the relocation happens. The code gets relocated from > Flash to RAM correctly. But when the control goes to in_ram it gets > looped there > > And then gets reset. I have done all the SDRAM tests all are successful. > So how to proceed for this issue
First thing you should to is update. Version 1.1.3 is about 6 years old, and for software this means it predates the dinosaurs. Read: this old stuff is completely unsupported. Second: read the FAQ; the problem you are running into is described here: http://www.denx.de/wiki/view/DULG/UBootCrashAfterRelocation Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de A mouse is an elephant built by the Japanese. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot