On 19/12/2025 15:29, Sumit Garg wrote:
> On Thu, Dec 18, 2025 at 11:45:55AM +0530, Varadarajan Narayanan wrote:
>> Enable relevant configs like USB PHY, gadget, fastboot,
>> fastboot MMC support etc. to enable fastboot flashing
>> of IPQ9574 based boards.
>>
>> Signed-off-by: Varadarajan Narayanan <[email protected]>
>> ---
>> configs/qcom_ipq9574_mmc_defconfig | 22 +++++++++++++++++++++-
>> 1 file changed, 21 insertions(+), 1 deletion(-)
>>
>> diff --git a/configs/qcom_ipq9574_mmc_defconfig
>> b/configs/qcom_ipq9574_mmc_defconfig
>> index 6592d9de39d..ac534738994 100644
>> --- a/configs/qcom_ipq9574_mmc_defconfig
>> +++ b/configs/qcom_ipq9574_mmc_defconfig
>> @@ -45,7 +45,7 @@ CONFIG_DWC_ETH_QOS=y
>> CONFIG_DWC_ETH_QOS_QCOM=y
>> CONFIG_RGMII=y
>> CONFIG_PHY=y
>> -CONFIG_PHY_QCOM_QMP_UFS=y
>
> Any reason to drop this?
>
>> +CONFIG_PHY_QCOM_QMP_USB=y
>> CONFIG_PHY_QCOM_QUSB2=y
>> CONFIG_PINCTRL=y
>> CONFIG_PINCONF=y
>> @@ -54,3 +54,23 @@ CONFIG_DEBUG_UART_ANNOUNCE=y
>> CONFIG_MSM_SERIAL=y
>> CONFIG_MSM_GENI_SERIAL=y
>> CONFIG_SOC_QCOM=y
>> +CONFIG_USB=y
>> +CONFIG_USB_GADGET=y
>> +CONFIG_DM_USB_GADGET=y
>> +CONFIG_CMD_USB=y
>> +CONFIG_USB_DWC3=y
>> +CONFIG_USB_DWC3_GADGET=y
>> +CONFIG_MISC=y
>> +CONFIG_USB_DWC3_GENERIC=y
>> +CONFIG_USB_FUNCTION_FASTBOOT=y
>> +CONFIG_FASTBOOT=y
>> +CONFIG_CMD_FASTBOOT=y
>> +CONFIG_FASTBOOT_BUF_ADDR=y
>> +CONFIG_FASTBOOT_BUF_SIZE=y
>> +CONFIG_FASTBOOT_FLASH=y
>> +CONFIG_FASTBOOT_FLASH_MMC=y
>> +CONFIG_FASTBOOT_FLASH_MMC_DEV=0
>
>> +CONFIG_USB_GADGET_VENDOR_NUM=0x18d1
>> +CONFIG_USB_GADGET_PRODUCT_NUM=0xd00d
>
> You should rather try to update following for fastboot:
>
> $ git grep -nr ARCH_QCOM drivers/usb/gadget/Kconfig
> drivers/usb/gadget/Kconfig:64: default 0x18d1 if ARCH_QCOM
> drivers/usb/gadget/Kconfig:92: default 0x4ee0 if ARCH_QCOM
This should be fixed by
https://lore.kernel.org/u-boot/[email protected]/>
>> +CONFIG_FASTBOOT_BUF_ADDR=0x50000000
>> +CONFIG_FASTBOOT_BUF_SIZE=0x4000000
>
> -Sumit
>
>> --
>> 2.34.1
>>
--
// Casey (she/her)
