> > Description: U-Boot hangs silently during boot when enabling DEBUG
> > in lib/fdtdec.c
> >
> > Not sure if its really a bug or rather a configuration issue on my side.
> >
> > Minimal steps to reproduce: <see patch>
> >
> > The hang is caused by `panic("FDT overlap");` later inside the if block.
> > (see `lib/fdtdec.c:1279` in `fdt_find_separate(void)`)
> >
> > Additionally, no boot log can be seen because serial is initialized after
> > loading the devicetree in this boot stage (see `common/board_r.c:665` in
> > `initcall_run_r(void)`)
> >
> > Tested on i.MX6 with configs for tqma6d_mba6 and other tq boards that
> > aren't, mainlined yet (tqma6ulx_mba6ul and tqma7d_mba7).
> >
> > Any idea what to look for to fix this on our side?
> >
>
> I can boot and reproduce the hangup issue on mx7dsabresd:
>
> <debug_uart>
> FDT 8787da38 gd 0091de20
> top 87887538 sp 87800000
> sys_init_sp_addr 0091ff10
> gbl_data_size 000000f0
> FDT overlap
> resetting ...
> System reset not supported on this platform
> ### ERROR ### Please RESET the board ###
Just want to revive this topic as the issue is still unresolved.
