From: Walter Schweizer <[email protected]> When dtb_name is missing or a configuration is missing, try to boot the default configuration in the image. The call to bootm needs the correct loadaddr to succeed.
Fixes booting when factoryset is missing. Signed-off-by: Walter Schweizer <[email protected]> Signed-off-by: Heiko Schocher <[email protected]> --- Ignore checkpatch warning: WARNING: line length of 266 exceeds 100 columns board/siemens/capricorn/capricorn_default.env | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/siemens/capricorn/capricorn_default.env b/board/siemens/capricorn/capricorn_default.env index ad88f7ed770..cf5bd09a4da 100644 --- a/board/siemens/capricorn/capricorn_default.env +++ b/board/siemens/capricorn/capricorn_default.env @@ -20,7 +20,7 @@ ip_method=none kernel_name=Image loadaddr=0x80400000 mmc_boot=run set_bootargs;run check_upgrade; run set_partition;run set_bootargs_mmc;run mmc_load_bootfiles -mmc_boot_fit=ext4load mmc 0:${mmc_part_nr} 0x88000000 boot/fitImage;if test -n ${A};then setenv bootargs ${bootargs} rootfs_sig=${sig_a};fi;if test -n ${B};then setenv bootargs ${bootargs} rootfs_sig=${sig_b};fi;bootm 0x88000000#conf-${dtb_name}.dtb;bootm +mmc_boot_fit=ext4load mmc 0:${mmc_part_nr} 0x88000000 boot/fitImage;if test -n ${A};then setenv bootargs ${bootargs} rootfs_sig=${sig_a};fi;if test -n ${B};then setenv bootargs ${bootargs} rootfs_sig=${sig_b};fi;bootm 0x88000000#conf-${dtb_name}.dtb;bootm 0x88000000 mmc_boot_image=ext4load mmc 0:${mmc_part_nr} ${fdt_addr} boot/${dtb_name}.dtb;if test $? -eq 1;then ext4load mmc 0:${mmc_part_nr} ${fdt_addr} boot/${dtb_name_default}.dtb;fi; ext4load mmc 0:${mmc_part_nr} ${loadaddr} boot/${kernel_name}; booti ${loadaddr} - ${fdt_addr} mmc_load_bootfiles=echo -n Loading from eMMC ...; if test -e mmc 0:${mmc_part_nr} boot/fitImage; then echo fit; setenv fdt_high; setenv initrd_high; run mmc_boot_fit; else echo image; run mmc_boot_image; fi net_nfs=wdt dev scu-wdt; wdt stop; echo Booting from network ...; run set_bootargs_net; tftpboot ${loadaddr} ${bootdir}/${kernel_name}; printenv bootargs; if test ${kernel_name} = fitImage; then setenv fdt_high; setenv initrd_high; bootm ${loadaddr}#conf-${dtb_name}.dtb; else tftpboot ${fdt_addr} ${serverip}:${bootdir}/${dtb_name}.dtb; if test $? -eq 1; then echo Loading default.dtb!; tftpboot ${fdt_addr} ${serverip}:${bootdir}/${dtb_name_default}.dtb; fi; booti ${loadaddr} - ${fdt_addr}; fi -- 2.20.1
