---
 arch/arm/cpu/armv7/omap4/clocks.c        |   61 ++++++++++++++++++++++++++---
 arch/arm/include/asm/arch-omap4/clocks.h |   12 +++++-
 2 files changed, 65 insertions(+), 8 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap4/clocks.c 
b/arch/arm/cpu/armv7/omap4/clocks.c
index 0db9d18..eda960c 100644
--- a/arch/arm/cpu/armv7/omap4/clocks.c
+++ b/arch/arm/cpu/armv7/omap4/clocks.c
@@ -66,7 +66,18 @@ static const u32 sys_clk_array[8] = {
  * Please use this tool for creating the table for any new frequency.
  */
 
-/* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo) */
+/* dpll locked at 1840 MHz MPU clk at 920 MHz(OPP Turbo 4460) - DCC OFF */
+static const struct dpll_params mpu_dpll_params_1840mhz[NUM_SYS_CLKS] = {
+       {230, 2, 1, -1, -1, -1, -1, -1},        /* 12 MHz   */
+       {920, 12, 1, -1, -1, -1, -1, -1},       /* 13 MHz   */
+       {219, 3, 1, -1, -1, -1, -1, -1},        /* 16.8 MHz */
+       {575, 11, 1, -1, -1, -1, -1, -1},       /* 19.2 MHz */
+       {460, 12, 1, -1, -1, -1, -1, -1},       /* 26 MHz   */
+       {920, 26, 1, -1, -1, -1, -1, -1},       /* 27 MHz   */
+       {575, 23, 1, -1, -1, -1, -1, -1}        /* 38.4 MHz */
+};
+
+/* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo 4430) */
 static const struct dpll_params mpu_dpll_params_1584mhz[NUM_SYS_CLKS] = {
        {66, 0, 1, -1, -1, -1, -1, -1},         /* 12 MHz   */
        {792, 12, 1, -1, -1, -1, -1, -1},       /* 13 MHz   */
@@ -320,6 +331,47 @@ u32 omap4_ddr_clk(void)
        return ddr_clk;
 }
 
+/*
+ * Lock MPU dpll
+ *
+ * Resulting MPU frequencies:
+ * 4430 ES1.0  : 600 MHz
+ * 4430 ES2.x  : 792 MHz (OPP Turbo)
+ * 4460                : 920 MHz (OPP Turbo) - DCC disabled
+ */
+void configure_mpu_dpll(void)
+{
+       const struct dpll_params *params;
+       struct dpll_regs *mpu_dpll_regs;
+       u32 omap4_rev, sysclk_ind;
+
+       omap4_rev = omap_revision();
+       sysclk_ind = get_sys_clk_index();
+
+       if (omap4_rev == OMAP4430_ES1_0)
+               params = &mpu_dpll_params_1200mhz[sysclk_ind];
+       else if (omap4_rev < OMAP4460_ES1_0)
+               params = &mpu_dpll_params_1584mhz[sysclk_ind];
+       else
+               params = &mpu_dpll_params_1840mhz[sysclk_ind];
+
+       /* DCC and clock divider settings for 4460 */
+       if (omap4_rev >= OMAP4460_ES1_0) {
+               mpu_dpll_regs =
+                       (struct dpll_regs *)&prcm->cm_clkmode_dpll_mpu;
+               bypass_dpll(&prcm->cm_clkmode_dpll_mpu);
+               clrbits_le32(&prcm->cm_mpu_mpu_clkctrl,
+                       MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK);
+               setbits_le32(&prcm->cm_mpu_mpu_clkctrl,
+                       MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK);
+               clrbits_le32(&mpu_dpll_regs->cm_clksel_dpll,
+                       CM_CLKSEL_DCC_EN_MASK);
+       }
+
+       do_setup_dpll(&prcm->cm_clkmode_dpll_mpu, params, DPLL_LOCK);
+       debug("MPU DPLL locked\n");
+}
+
 static void setup_dplls(void)
 {
        u32 sysclk_ind, temp;
@@ -349,12 +401,7 @@ static void setup_dplls(void)
        debug("PER DPLL locked\n");
 
        /* MPU dpll */
-       if (omap_revision() == OMAP4430_ES1_0)
-               params = &mpu_dpll_params_1200mhz[sysclk_ind];
-       else
-               params = &mpu_dpll_params_1584mhz[sysclk_ind];
-       do_setup_dpll(&prcm->cm_clkmode_dpll_mpu, params, DPLL_LOCK);
-       debug("MPU DPLL locked\n");
+       configure_mpu_dpll();
 }
 
 static void setup_non_essential_dplls(void)
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h 
b/arch/arm/include/asm/arch-omap4/clocks.h
index 5d9cb50..374e064 100644
--- a/arch/arm/include/asm/arch-omap4/clocks.h
+++ b/arch/arm/include/asm/arch-omap4/clocks.h
@@ -105,9 +105,11 @@ struct omap4_prcm_regs {
        u32 cm_ssc_deltamstep_dpll_ddrphy;
        u32 pad014[5];
        u32 cm_shadow_freq_config1;
+       u32 pad0141[47];
+       u32 cm_mpu_mpu_clkctrl;
 
        /* cm1.dsp */
-       u32 pad015[103];
+       u32 pad015[55];
        u32 cm_dsp_clkstctrl;
        u32 pad016[7];
        u32 cm_dsp_dsp_clkctrl;
@@ -515,6 +517,8 @@ struct omap4_prcm_regs {
 #define CM_CLKSEL_DPLL_M_MASK                  (0x7FF << 8)
 #define CM_CLKSEL_DPLL_N_SHIFT                 0
 #define CM_CLKSEL_DPLL_N_MASK                  0x7F
+#define CM_CLKSEL_DCC_EN_SHIFT                 22
+#define CM_CLKSEL_DCC_EN_MASK                  (1 << 22)
 
 #define OMAP4_DPLL_MAX_N       127
 
@@ -596,6 +600,12 @@ struct omap4_prcm_regs {
 /* CM_L3INIT_USBPHY_CLKCTRL */
 #define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK  8
 
+/* CM_MPU_MPU_CLKCTRL */
+#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24
+#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK  (1 << 24)
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT  25
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK   (1 << 25)
+
 /* Clock frequencies */
 #define OMAP_SYS_CLK_FREQ_38_4_MHZ     38400000
 #define OMAP_SYS_CLK_IND_38_4_MHZ      6
-- 
1.7.0.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to