On 2/25/26 08:02, Heinrich Schuchardt wrote:
> Symbol CONFIG_STM32_RESET does not exist.
> Don't select it.
>
> Signed-off-by: Heinrich Schuchardt <[email protected]>
> ---
> arch/arm/mach-stm32/Kconfig | 3 ---
> arch/arm/mach-stm32mp/Kconfig | 4 ----
> 2 files changed, 7 deletions(-)
>
> diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
> index de9d8547e61..1c6de559142 100644
> --- a/arch/arm/mach-stm32/Kconfig
> +++ b/arch/arm/mach-stm32/Kconfig
> @@ -10,7 +10,6 @@ config STM32F4
> select PINCTRL_STM32
> select RAM
> select STM32_RCC
> - select STM32_RESET
> select STM32_SDRAM
> select STM32_SERIAL
> select STM32_TIMER
> @@ -27,7 +26,6 @@ config STM32F7
> select PINCTRL_STM32
> select RAM
> select STM32_RCC
> - select STM32_RESET
> select STM32_SDRAM
> select STM32_SERIAL
> select STM32_TIMER
> @@ -47,7 +45,6 @@ config STM32H7
> select RAM
> select REGMAP
> select STM32_RCC
> - select STM32_RESET
> select STM32_SDRAM
> select STM32_SERIAL
> select STM32_TIMER
> diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
> index 2716844b259..8ade36e4fbb 100644
> --- a/arch/arm/mach-stm32mp/Kconfig
> +++ b/arch/arm/mach-stm32mp/Kconfig
> @@ -50,7 +50,6 @@ config STM32MP13X
> select OF_BOARD_SETUP
> select PINCTRL_STM32
> select STM32_RCC
> - select STM32_RESET
> select STM32_SERIAL
> select SUPPORT_SPL if !TFABOOT
> select SYS_ARCH_TIMER
> @@ -72,7 +71,6 @@ config STM32MP15X
> select OF_BOARD_SETUP
> select PINCTRL_STM32
> select STM32_RCC
> - select STM32_RESET
> select STM32_SERIAL
> select SUPPORT_SPL
> select SYS_ARCH_TIMER
> @@ -91,7 +89,6 @@ config STM32MP23X
> select OF_BOARD
> select PINCTRL_STM32
> select STM32_RCC
> - select STM32_RESET
> select STM32_SERIAL
> select STM32MP_TAMP_NVMEM
> select SYS_ARCH_TIMER
> @@ -117,7 +114,6 @@ config STM32MP25X
> select OF_BOARD
> select PINCTRL_STM32
> select STM32_RCC
> - select STM32_RESET
> select STM32_SERIAL
> select SYS_ARCH_TIMER
> select TFABOOT
Hi Heinrich
I noticed that i will need to send an additional patch similar to yours when my
last pull request will be
merged by Tom as i was still using STM32_RESET when adding STM32MP21 support:
https://patchwork.ozlabs.org/project/uboot/patch/20260203-upstream_add_stm32mp21_support-v1-5-48ca3409c...@foss.st.com/
Reviewed-by: Patrice Chotard <[email protected]>
Thanks
Patrice
