This series adds mmc SPL support for OMAP4. This is essentially an up-streaming effort for TI's x-loader for OMAP4 using the SPL framework
This work partly draws upon previous work done for x-loader by: Santosh Shilimkar <santosh.shilim...@ti.com> Rajendra Nayak <rna...@ti.com> and many others This series depends on the following series for the new SPL framework: http://marc.info/?l=u-boot&m=131056990001719&w=2 Features supported: * Clock init - DPLL locking, clock domains/modules enabling * SDRAM/DMM initialization * Mux initialization * MMC raw read support * MMC FAT read support Improvments over x-loader: * Code completely revamped * DPLL programming that works for all SYS_CLK frequencies * Automatic SDRAM identification and initialization * Board dependent parts(especially mux) deferred to u-boot. So, same SPL will work for Panda and SDP and most likely on any other board that comes along * Flexible about the payload. Any image with a mkimage header can be loaded. * The core SPL logic is generic and available for OMAP3/4. So, OMAP3 platforms can easily extend this work to add SPL support for the respective boards. V2: * Some fixes in SDRAM init, clock init * Use of pre-calculated M & N values for DPLL locking instead run-time calculation * Change in make files to allow reuse of common rules between boards * Console initialization moved further earlier in the boot allowing traces from even clock initialization code * Reuse utility macros from a previous series V3: * Moved to the new SPL framework * struct based register access for clock init * Squashed together related patches as per Wolfgang's suggestions * Re-organization of code in sdram init for better readability * SPL loading the payload using mkimage header * Avoided using custom bit-field accessor macros * Several other minor changes(documented in respective patches) V4: * Rebased on u-boot-ti/master as on 21 Jul 2011 Aneesh V (11): omap4: utility function to identify the context of hw init omap4: cleanup pin mux data omap4: add OMAP4430 revision check omap4: add clock support omap4: add sdram init support omap4: calculate EMIF register values omap4: automatic sdram detection armv7: start.S: fixes and enhancements for SPL omap: add basic SPL support Correct ih_os for u-boot.img omap: add MMC and FAT support to SPL John Rigby (1): mkimage: Add OMAP boot image support Makefile | 2 +- arch/arm/cpu/armv7/Makefile | 7 +- arch/arm/cpu/armv7/cpu.c | 7 + arch/arm/cpu/armv7/omap-common/Makefile | 5 + arch/arm/cpu/armv7/omap-common/spl.c | 272 ++++ arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 62 + arch/arm/cpu/armv7/omap-common/utils.c | 57 + arch/arm/cpu/armv7/omap4/Makefile | 6 + arch/arm/cpu/armv7/omap4/board.c | 161 +++- arch/arm/cpu/armv7/omap4/clocks.c | 842 +++++++++++++ .../panda => arch/arm/cpu/armv7/omap4}/config.mk | 25 +- arch/arm/cpu/armv7/omap4/emif.c | 1305 ++++++++++++++++++++ arch/arm/cpu/armv7/omap4/lowlevel_init.S | 31 + arch/arm/cpu/armv7/omap4/omap4_mux_data.h | 76 ++ arch/arm/cpu/armv7/omap4/sdram_elpida.c | 282 +++++ arch/arm/cpu/armv7/start.S | 50 +- arch/arm/cpu/armv7/u-boot.lds | 2 + arch/arm/include/asm/arch-omap4/clocks.h | 664 ++++++++++ arch/arm/include/asm/arch-omap4/emif.h | 1034 ++++++++++++++++ arch/arm/include/asm/arch-omap4/omap4.h | 52 +- arch/arm/include/asm/arch-omap4/sys_proto.h | 72 ++- arch/arm/include/asm/armv7.h | 5 + arch/arm/include/asm/omap_common.h | 56 + board/ti/panda/Makefile | 2 + board/ti/panda/panda.c | 25 +- board/ti/{sdp4430/sdp.h => panda/panda_mux_data.h} | 76 +- board/ti/sdp4430/Makefile | 2 + board/ti/sdp4430/config.mk | 31 - board/ti/sdp4430/sdp.c | 25 +- .../{panda/panda.h => sdp4430/sdp4430_mux_data.h} | 128 +-- common/image.c | 9 +- include/configs/omap4_panda.h | 37 + include/configs/omap4_sdp4430.h | 37 + include/image.h | 1 + spl/Makefile | 6 + tools/Makefile | 2 + tools/mkimage.c | 2 + tools/mkimage.h | 1 + tools/omap/clocks_get_m_n.c | 197 +++ tools/omapimage.c | 224 ++++ tools/omapimage.h | 50 + 41 files changed, 5668 insertions(+), 262 deletions(-) create mode 100644 arch/arm/cpu/armv7/omap-common/spl.c create mode 100644 arch/arm/cpu/armv7/omap-common/u-boot-spl.lds create mode 100644 arch/arm/cpu/armv7/omap-common/utils.c create mode 100644 arch/arm/cpu/armv7/omap4/clocks.c rename {board/ti/panda => arch/arm/cpu/armv7/omap4}/config.mk (64%) create mode 100644 arch/arm/cpu/armv7/omap4/emif.c create mode 100644 arch/arm/cpu/armv7/omap4/omap4_mux_data.h create mode 100644 arch/arm/cpu/armv7/omap4/sdram_elpida.c create mode 100644 arch/arm/include/asm/arch-omap4/clocks.h create mode 100644 arch/arm/include/asm/arch-omap4/emif.h create mode 100644 arch/arm/include/asm/omap_common.h rename board/ti/{sdp4430/sdp.h => panda/panda_mux_data.h} (76%) delete mode 100644 board/ti/sdp4430/config.mk rename board/ti/{panda/panda.h => sdp4430/sdp4430_mux_data.h} (67%) create mode 100644 tools/omap/clocks_get_m_n.c create mode 100644 tools/omapimage.c create mode 100644 tools/omapimage.h _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot