Hi list, I've just bought an OpenRD Ultimate board and I've managed to get u-boot running on it. I am building it like this, using the latest u-boot GIT repo:
make mrproper CROSS_COMPILE=arm-none-linux-gnueabi- make openrd_ultimate_config CROSS_COMPILE=arm-none-linux-gnueabi- make u-boot.kwb CROSS_COMPILE=arm-none-linux-gnueabi- and then I burn the .kwb file into the flash using openocd. Unfortunately I cannot get the Gig Eth ports to work in u-boot at the moment. When I run the following at the command prompt the console just hangs and I have to reboot: Marvell>> setenv ipaddr 192.168.1.1 Marvell>> ping 192.168.1.30 ... board hangs ... Has anybody else seen this issue? Thanks in advance for any help you can give. Alex
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot