Adds NAND libarary to SPL.
Signed-off-by: Simon Schwarz <simonschwarz...@gmail.com>
---
V1 changes:
CHG Default to HW ecc in SPL build
ADD nand_read_buf16 function, read buffer
ADD omap_dev_ready function, indicte if chip is ready
V2 changes:
DEL GPMC_WAIT0_PIN_ACTIVE define
CHG omap_dev_ready() renamed to omap_spl_dev_ready(), does not use the
GPMC_WAIT0_PIN_ACTIVE-define anymore
CHG ogpmc_read_buf16 renamed omap_spl_read_buf16
ADD omap_spl_read_buf, 8x buf read function
ADD CONFIG_SPL_POWER_SUPPORT and CONFIG_SPL_NAND_SUPPORT to SPL
CHG cosmetic
CHG nand_base and nand_bbt aren't needed for SPL anymore
CHG omap_nand_switch_ecc is not compiled for SPL
ADD entry for CONFIG_SPL_POWER_SUPPORT and CONFIG_SPL_NAND_SUPPORT to README.SPL
V3 changes:
DEL cosmetic (empty line)
V4 changes:
nothing
V5 changes:
CHG nand_ecc.o is only compiled for SPL if CONFIG_OMAP34XX is set
V6 changes:
ADD nand_spl.c - git add, finally
DEL nand_ecc barrier ifdef for OMAP3
V7 changes:
CHG nand_read_buf and nand_read_buf16 - removed static modifier
ADD nand_base.c to SPL
DEL omap_spl_read_buf16 and omap_spl_read_buf from omap_gpmc - now use the
functions of nand_base.de
ADD nand_read_buf and nand_read_buf16 to nand.h
CHG commit message to reflect that also POWER library is added
CHG renamed nand_spl.c to nand_spl_simple.c
CHG removed mtd from all interfaces of the nand_spl_simple
CHG nand_load image is now nand_spl_load_image
CHG removed comment on the transition from nand_boot to nand_spl_simple
CHG all offset parameters are now of type loff_t
CHG moved power library adding to an own patch
Transition from V1 to V2 also includes that this patch is now based on
- the new SPL layout by Aneesh V and Daniel Schwierzeck
- the OMAP4 SPL patches by Aneesh V
This Patch is related to "[U-Boot,4/5] devkit8000 nand_spl: Add SPL NAND support
to omap_gpmc driver"
(http://article.gmane.org/gmane.comp.boot-loaders.u-boot/102115) in V1
---
doc/README.SPL | 1 +
drivers/mtd/nand/Makefile | 10 +-
drivers/mtd/nand/nand_base.c | 4 +-
drivers/mtd/nand/nand_spl_simple.c | 257 ++++++++++++++++++++++++++++++++++++
drivers/mtd/nand/omap_gpmc.c | 27 ++++
include/nand.h | 6 +-
spl/Makefile | 1 +
7 files changed, 301 insertions(+), 5 deletions(-)
create mode 100644 drivers/mtd/nand/nand_spl_simple.c
diff --git a/doc/README.SPL b/doc/README.SPL
index ce8e19f..ef946ce 100644
--- a/doc/README.SPL
+++ b/doc/README.SPL
@@ -60,3 +60,4 @@ CONFIG_SPL_SPI_FLASH_SUPPORT (drivers/mtd/spi/libspi_flash.o)
CONFIG_SPL_SPI_SUPPORT (drivers/spi/libspi.o)
CONFIG_SPL_FAT_SUPPORT (fs/fat/libfat.o)
CONFIG_SPL_LIBGENERIC_SUPPORT (lib/libgeneric.o)
+CONFIG_SPL_NAND_SUPPORT (drivers/mtd/nand/libnand.o)
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 8b598f6..fcd8b74 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -26,12 +26,18 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libnand.o
ifdef CONFIG_CMD_NAND
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_OMAP34XX
+COBJS-y += nand_spl_simple.o
+endif
+else
COBJS-y += nand.o
-COBJS-y += nand_base.o
COBJS-y += nand_bbt.o
-COBJS-y += nand_ecc.o
COBJS-y += nand_ids.o
COBJS-y += nand_util.o
+endif
+COBJS-y += nand_ecc.o
+COBJS-y += nand_base.o
COBJS-$(CONFIG_NAND_ATMEL) += atmel_nand.o
COBJS-$(CONFIG_DRIVER_NAND_BFIN) += bfin_nand.o
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 1a95a91..e7dfcb1 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -213,7 +213,7 @@ static void nand_write_buf(struct mtd_info *mtd, const
uint8_t *buf, int len)
*
* Default read function for 8bit buswith
*/
-static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
int i;
struct nand_chip *chip = mtd->priv;
@@ -269,7 +269,7 @@ static void nand_write_buf16(struct mtd_info *mtd, const
uint8_t *buf, int len)
*
* Default read function for 16bit buswith
*/
-static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
+void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
{
int i;
struct nand_chip *chip = mtd->priv;
diff --git a/drivers/mtd/nand/nand_spl_simple.c
b/drivers/mtd/nand/nand_spl_simple.c
new file mode 100644
index 0000000..e33085e
--- /dev/null
+++ b/drivers/mtd/nand/nand_spl_simple.c
@@ -0,0 +1,257 @@
+/*
+ * (C) Copyright 2006-2008
+ * Stefan Roese, DENX Software Engineering, s...@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <asm/io.h>
+
+static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS;
+static nand_info_t mtd;
+static struct nand_chip nand_chip;
+
+#if (CONFIG_SYS_NAND_PAGE_SIZE <= 512)
+/*
+ * NAND command for small page NAND devices (512)
+ */
+static int nand_command(int block, int page, loff_t offs,
+ u8 cmd)
+{
+ struct nand_chip *this = mtd.priv;
+ int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT;
+
+ while (!this->dev_ready(&mtd))
+ ;
+
+ /* Begin command latch cycle */
+ this->cmd_ctrl(&mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ /* Set ALE and clear CLE to start address cycle */
+ /* Column address */
+ this->cmd_ctrl(&mtd, offs, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
+ this->cmd_ctrl(&mtd, page_addr & 0xff, NAND_CTRL_ALE); /* A[16:9] */
+ this->cmd_ctrl(&mtd, (page_addr >> 8) & 0xff,
+ NAND_CTRL_ALE); /* A[24:17] */
+#ifdef CONFIG_SYS_NAND_4_ADDR_CYCLE
+ /* One more address cycle for devices > 32MiB */
+ this->cmd_ctrl(&mtd, (page_addr >> 16) & 0x0f,
+ NAND_CTRL_ALE); /* A[28:25] */
+#endif
+ /* Latch in address */
+ this->cmd_ctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+
+ /*
+ * Wait a while for the data to be ready
+ */
+ while (!this->dev_ready(&mtd))
+ ;
+
+ return 0;
+}
+#else
+/*
+ * NAND command for large page NAND devices (2k)
+ */
+static int nand_command(int block, int page, loff_t offs,
+ u8 cmd)
+{
+ struct nand_chip *this = mtd.priv;
+ int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT;
+ void (*hwctrl)(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl) = this->cmd_ctrl;
+
+ while (!this->dev_ready(&mtd))
+ ;
+
+ /* Emulate NAND_CMD_READOOB */
+ if (cmd == NAND_CMD_READOOB) {
+ offs += CONFIG_SYS_NAND_PAGE_SIZE;
+ cmd = NAND_CMD_READ0;
+ }
+
+ /* Shift the offset from byte addressing to word addressing. */
+ if (this->options & NAND_BUSWIDTH_16)
+ offs >>= 1;
+
+ /* Begin command latch cycle */
+ hwctrl(&mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ /* Set ALE and clear CLE to start address cycle */
+ /* Column address */
+ hwctrl(&mtd, offs & 0xff,
+ NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */
+ hwctrl(&mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */
+ /* Row address */
+ hwctrl(&mtd, (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */
+ hwctrl(&mtd, ((page_addr >> 8) & 0xff),
+ NAND_CTRL_ALE); /* A[27:20] */
+#ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE
+ /* One more address cycle for devices > 128MiB */
+ hwctrl(&mtd, (page_addr >> 16) & 0x0f,
+ NAND_CTRL_ALE); /* A[31:28] */
+#endif
+ /* Latch in address */
+ hwctrl(&mtd, NAND_CMD_READSTART,
+ NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+
+ /*
+ * Wait a while for the data to be ready
+ */
+ while (!this->dev_ready(&mtd))
+ ;
+
+ return 0;
+}
+#endif
+
+static int nand_is_bad_block(int block)
+{
+ struct nand_chip *this = mtd.priv;
+
+ nand_command(block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS,
+ NAND_CMD_READOOB);
+
+ /*
+ * Read one byte (or two if it's a 16 bit chip).
+ */
+ if (this->options & NAND_BUSWIDTH_16) {
+ if (readw(this->IO_ADDR_R) != 0xffff)
+ return 1;
+ } else {
+ if (readb(this->IO_ADDR_R) != 0xff)
+ return 1;
+ }
+
+ return 0;
+}
+
+static int nand_read_page(int block, int page, void *dst)
+{
+ struct nand_chip *this = mtd.priv;
+ u_char *ecc_calc;
+ u_char *ecc_code;
+ u_char *oob_data;
+ int i;
+ int eccsize = CONFIG_SYS_NAND_ECCSIZE;
+ int eccbytes = CONFIG_SYS_NAND_ECCBYTES;
+ int eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
+ uint8_t *p = dst;
+ int stat;
+
+ nand_command(block, page, 0, NAND_CMD_READ0);
+
+ /* No malloc available for now, just use some temporary locations
+ * in SDRAM
+ */
+ ecc_calc = (u_char *)(CONFIG_SYS_SDRAM_BASE + 0x10000);
+ ecc_code = ecc_calc + 0x100;
+ oob_data = ecc_calc + 0x200;
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ this->ecc.hwctl(&mtd, NAND_ECC_READ);
+ this->read_buf(&mtd, p, eccsize);
+ this->ecc.calculate(&mtd, p, &ecc_calc[i]);
+ }
+ this->read_buf(&mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
+
+ /* Pick the ECC bytes out of the oob data */
+ for (i = 0; i < CONFIG_SYS_NAND_ECCTOTAL; i++)
+ ecc_code[i] = oob_data[nand_ecc_pos[i]];
+
+ eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
+ p = dst;
+
+ for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ /* No chance to do something with the possible error message
+ * from correct_data(). We just hope that all possible errors
+ * are corrected by this routine.
+ */
+ stat = this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]);
+ }
+
+ return 0;
+}
+
+int nand_spl_load_image(loff_t offs, unsigned int size, void *dst)
+{
+ unsigned int block, lastblock;
+ unsigned int page;
+
+ /*
+ * offs has to be aligned to a page address!
+ */
+ block = offs / CONFIG_SYS_NAND_BLOCK_SIZE;
+ lastblock = (offs + size - 1) / CONFIG_SYS_NAND_BLOCK_SIZE;
+ page = (offs % CONFIG_SYS_NAND_BLOCK_SIZE) / CONFIG_SYS_NAND_PAGE_SIZE;
+
+ while (block <= lastblock) {
+ if (!nand_is_bad_block(block)) {
+ /*
+ * Skip bad blocks
+ */
+ while (page < CONFIG_SYS_NAND_PAGE_COUNT) {
+ nand_read_page(block, page, dst);
+ dst += CONFIG_SYS_NAND_PAGE_SIZE;
+ page++;
+ }
+
+ page = 0;
+ } else {
+ lastblock++;
+ }
+
+ block++;
+ }
+
+ return 0;
+}
+
+/* nand_init() - initialize data to make nand usable by SPL */
+void nand_init(void)
+{
+ /*
+ * Init board specific nand support
+ */
+ mtd.priv = &nand_chip;
+ nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W =
+ (void __iomem *)CONFIG_SYS_NAND_BASE;
+ nand_chip.options = 0;
+ board_nand_init(&nand_chip);
+
+ if (nand_chip.select_chip)
+ nand_chip.select_chip(&mtd, 0);
+}
+
+/* SPL interface to read a page */
+void nand_spl_read_page(loff_t offs, void *dst)
+{
+ int block, page;
+ /* calc the block */
+ block = offs / CONFIG_SYS_NAND_BLOCK_SIZE;
+ /* calc the page */
+ page = (offs % CONFIG_SYS_NAND_BLOCK_SIZE) / CONFIG_SYS_NAND_PAGE_SIZE;
+ /* read */
+ nand_read_page(block, page, dst);
+}
+
+/* Unselect after operation */
+void nand_deselect(void)
+{
+ if (nand_chip.select_chip)
+ nand_chip.select_chip(&mtd, -1);
+}
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 99b9cef..5bbec48 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -61,6 +61,14 @@ static void omap_nand_hwcontrol(struct mtd_info *mtd,
int32_t cmd,
writeb(cmd, this->IO_ADDR_W);
}
+#ifdef CONFIG_SPL_BUILD
+/* Check wait pin as dev ready indicator */
+int omap_spl_dev_ready(struct mtd_info *mtd)
+{
+ return gpmc_cfg->status & (1 << 8);
+}
+#endif
+
/*
* omap_hwecc_init - Initialize the Hardware ECC for NAND flash in
* GPMC controller
@@ -224,6 +232,7 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int32_t
mode)
}
}
+#ifndef CONFIG_SPL_BUILD
/*
* omap_nand_switch_ecc - switch the ECC operation b/w h/w ecc and s/w ecc.
* The default is to come up on s/w ecc
@@ -280,6 +289,7 @@ void omap_nand_switch_ecc(int32_t hardware)
nand->options &= ~NAND_OWN_BUFFERS;
}
+#endif /* CONFIG_SPL_BUILD */
/*
* Board-specific NAND initialization. The following members of the
@@ -338,7 +348,24 @@ int board_nand_init(struct nand_chip *nand)
nand->chip_delay = 100;
/* Default ECC mode */
+#ifndef CONFIG_SPL_BUILD
nand->ecc.mode = NAND_ECC_SOFT;
+#else
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.layout = &hw_nand_oob;
+ nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
+ nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
+ nand->ecc.hwctl = omap_enable_hwecc;
+ nand->ecc.correct = omap_correct_data;
+ nand->ecc.calculate = omap_calculate_ecc;
+ omap_hwecc_init(nand);
+
+ if (nand->options & NAND_BUSWIDTH_16)
+ nand->read_buf = nand_read_buf16;
+ else
+ nand->read_buf = nand_read_buf;
+ nand->dev_ready = omap_spl_dev_ready;
+#endif
return 0;
}
diff --git a/include/nand.h b/include/nand.h
index 3c5ef4e..54905bb 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -132,9 +132,13 @@ int nand_lock( nand_info_t *meminfo, int tight );
int nand_unlock( nand_info_t *meminfo, ulong start, ulong length );
int nand_get_lock_status(nand_info_t *meminfo, loff_t offset);
-void nand_spl_load_image(loff_t offs, unsigned int size, uchar *dst);
+int nand_spl_load_image(loff_t offs, unsigned int size, void *dst);
+void nand_spl_read_page(loff_t offs, void *dst);
void nand_deselect(void);
+void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len);
+void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len);
+
#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
void board_nand_select_device(struct nand_chip *nand, int chip);
#endif
diff --git a/spl/Makefile b/spl/Makefile
index 87f13f6..17d4f7f 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -46,6 +46,7 @@ LIBS-$(CONFIG_SPL_SPI_FLASH_SUPPORT) +=
drivers/mtd/spi/libspi_flash.o
LIBS-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/libspi.o
LIBS-$(CONFIG_SPL_FAT_SUPPORT) += fs/fat/libfat.o
LIBS-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/libgeneric.o
+LIBS-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/libnand.o
ifeq ($(SOC),omap3)
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
--
1.7.4.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
