Hello guys I use u-boot U-Boot 1.3.1 - stm24_0054 for sh (Board mb411) (STLinux 2.4) It is no problem to boot with u-boot from flash at 0x000000.
But I have to install u-boot in another position in flash than 0x000000. I can also load the uboot from a u-boot loaded in RAM with jtag (with go 0xa0650000). In the Bootvector is a jump written in Assembly language like: ##################################### .text .org 0 mov.l start_addr, r0 mov.l p2_mask, r1 mov.l @r0, r0 or r1, r0 jmp @r0 nop .align 2 start_addr: .long 0xa0650000 p2_mask: .long 0xa0000000 .end ##################################### (I have no idea about assembly language; I just modified an existing code!) Here is hangs. No start at all. I used the CFG_MONITOR_BASE=0xa0650000 without success. Is the problem my U-boot or the assembly code? Thank you contumax _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot