Dear Wolfgang Denk,
On 08/23/2011 07:45 PM, Wolfgang Denk wrote:
> Dear Simon Schwarz,
>
> In message<4e53c9f6.4010...@gmail.com> you wrote:
>>
>> How can FDT be used without a FIT image?
>
> I don't understand this question - using the FDT and the image format
> are orthogonal to each other.
>
>> I can't really get this from the code - if someone can point me in the
>> right direction this would be great!
>
> Try:
> help bootm
>
This prints:
# help bootm
bootm - boot application image from memory
Usage:
bootm [addr [arg ...]]
- boot application image stored in memory
passing arguments 'arg ...'; when booting a Linux kernel,
'arg' can be the address of an initrd image
Sub-commands to do part of the bootm sequence. The sub-commands must be
issued in the order below (it's ok to not issue all sub-commands):
start [addr [arg ...]]
loados - load OS image
cmdline - OS specific command line processing/setup
bdt - OS specific bd_t processing
prep - OS specific prep before relocation or go
go - start OS
(Yes, #define CONFIG_OF_LIBFDT 1 is in my board config)
> For example:
>
> tftp 600000 uImage
> tftp 900000 board.dtb
> bootm 600000 - 900000
>
> What exactly is your problem?
Thanks - john already pointed me to this. This works. It was/is just a
problem with the help text - duno why..
>
> Best regards,
>
> Wolfgang Denk
>
Regards
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
