On 08/23/11 01:13, Tom Rini wrote:
> Switch from the legacy omap3 mmc driver to the new generic omap hsmmc
> driver. This patch is based on the work done for Beagle, etc.
>
> Signed-off-by: Tom Rini <tr...@ti.com>
It is a good practice to CC the board maintainer. Thanks.
Tested-by: Igor Grinberg <grinb...@compulab.co.il>
> ---
> board/cm_t35/cm_t35.c | 8 ++++++++
> include/configs/cm_t35.h | 3 ++-
> 2 files changed, 10 insertions(+), 1 deletions(-)
>
> diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c
> index f82111b..420cd70 100644
> --- a/board/cm_t35/cm_t35.c
> +++ b/board/cm_t35/cm_t35.c
> @@ -313,6 +313,14 @@ void set_muxconf_regs(void)
> cm_t3730_set_muxconf();
> }
>
> +#ifdef CONFIG_GENERIC_MMC
> +int board_mmc_init(bd_t *bis)
> +{
> + omap_mmc_init(0);
> + return 0;
> +}
> +#endif
> +
> /*
> * Routine: setup_net_chip_gmpc
> * Description: Setting up the configuration GPMC registers specific to the
> diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
> index 16a5f5b..496a904 100644
> --- a/include/configs/cm_t35.h
> +++ b/include/configs/cm_t35.h
> @@ -108,8 +108,9 @@
> #define CONFIG_BAUDRATE 115200
> #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
> 115200}
> +#define CONFIG_GENERIC_MMC 1
> #define CONFIG_MMC 1
> -#define CONFIG_OMAP3_MMC 1
> +#define CONFIG_OMAP_HSMMC 1
> #define CONFIG_DOS_PARTITION 1
>
> /* DDR - I use Micron DDR */
--
Regards,
Igor.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
