* Cleanup register definitions by introducing new regs-uart.h, compliant with
rest of U-Boot.
* Remove old register definitions from pxa-regs.h
* Convert serial_pxa to new regs-uart.h
* Cleanup serial_pxa
Signed-off-by: Marek Vasut <marek.va...@gmail.com>
---
arch/arm/include/asm/arch-pxa/pxa-regs.h | 111 -------
drivers/serial/serial_pxa.c | 464 ++++++++++++------------------
2 files changed, 188 insertions(+), 387 deletions(-)
diff --git a/arch/arm/include/asm/arch-pxa/pxa-regs.h
b/arch/arm/include/asm/arch-pxa/pxa-regs.h
index 109fdc0..52c79a9 100644
--- a/arch/arm/include/asm/arch-pxa/pxa-regs.h
+++ b/arch/arm/include/asm/arch-pxa/pxa-regs.h
@@ -315,117 +315,6 @@ typedef void (*ExcpHndlr) (void) ;
/******************************************************************************/
/*
- * UARTs
- */
-/* Full Function UART (FFUART) */
-#define FFUART FFRBR
-#define FFRBR 0x40100000 /* Receive Buffer Register (read only) */
-#define FFTHR 0x40100000 /* Transmit Holding Register (write only) */
-#define FFIER 0x40100004 /* Interrupt Enable Register (read/write) */
-#define FFIIR 0x40100008 /* Interrupt ID Register (read only) */
-#define FFFCR 0x40100008 /* FIFO Control Register (write only) */
-#define FFLCR 0x4010000C /* Line Control Register (read/write) */
-#define FFMCR 0x40100010 /* Modem Control Register (read/write) */
-#define FFLSR 0x40100014 /* Line Status Register (read only) */
-#define FFMSR 0x40100018 /* Modem Status Register (read only) */
-#define FFSPR 0x4010001C /* Scratch Pad Register (read/write) */
-#define FFISR 0x40100020 /* Infrared Selection Register (read/write)
*/
-#define FFDLL 0x40100000 /* Divisor Latch Low Register (DLAB = 1)
(read/write) */
-#define FFDLH 0x40100004 /* Divisor Latch High Register (DLAB = 1)
(read/write) */
-
-/* Bluetooth UART (BTUART) */
-#define BTUART BTRBR
-#define BTRBR 0x40200000 /* Receive Buffer Register (read only) */
-#define BTTHR 0x40200000 /* Transmit Holding Register (write only) */
-#define BTIER 0x40200004 /* Interrupt Enable Register (read/write) */
-#define BTIIR 0x40200008 /* Interrupt ID Register (read only) */
-#define BTFCR 0x40200008 /* FIFO Control Register (write only) */
-#define BTLCR 0x4020000C /* Line Control Register (read/write) */
-#define BTMCR 0x40200010 /* Modem Control Register (read/write) */
-#define BTLSR 0x40200014 /* Line Status Register (read only) */
-#define BTMSR 0x40200018 /* Modem Status Register (read only) */
-#define BTSPR 0x4020001C /* Scratch Pad Register (read/write) */
-#define BTISR 0x40200020 /* Infrared Selection Register (read/write)
*/
-#define BTDLL 0x40200000 /* Divisor Latch Low Register (DLAB = 1)
(read/write) */
-#define BTDLH 0x40200004 /* Divisor Latch High Register (DLAB = 1)
(read/write) */
-
-/* Standard UART (STUART) */
-#define STUART STRBR
-#define STRBR 0x40700000 /* Receive Buffer Register (read only) */
-#define STTHR 0x40700000 /* Transmit Holding Register (write only) */
-#define STIER 0x40700004 /* Interrupt Enable Register (read/write) */
-#define STIIR 0x40700008 /* Interrupt ID Register (read only) */
-#define STFCR 0x40700008 /* FIFO Control Register (write only) */
-#define STLCR 0x4070000C /* Line Control Register (read/write) */
-#define STMCR 0x40700010 /* Modem Control Register (read/write) */
-#define STLSR 0x40700014 /* Line Status Register (read only) */
-#define STMSR 0x40700018 /* Reserved */
-#define STSPR 0x4070001C /* Scratch Pad Register (read/write) */
-#define STISR 0x40700020 /* Infrared Selection Register (read/write)
*/
-#define STDLL 0x40700000 /* Divisor Latch Low Register (DLAB = 1)
(read/write) */
-#define STDLH 0x40700004 /* Divisor Latch High Register (DLAB = 1)
(read/write) */
-
-#define IER_DMAE (1 << 7) /* DMA Requests Enable */
-#define IER_UUE (1 << 6) /* UART Unit Enable */
-#define IER_NRZE (1 << 5) /* NRZ coding Enable */
-#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
-#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
-#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt
Enable */
-#define IER_TIE (1 << 1) /* Transmit Data request
Interrupt Enable */
-#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt
Enable */
-
-#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
-#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
-#define IIR_TOD (1 << 3) /* Time Out Detected */
-#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
-#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
-#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
-
-#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
-#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
-#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
-#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
-#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
-#define FCR_ITL_1 (0)
-#define FCR_ITL_8 (FCR_ITL1)
-#define FCR_ITL_16 (FCR_ITL2)
-#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
-
-#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
-#define LCR_SB (1 << 6) /* Set Break */
-#define LCR_STKYP (1 << 5) /* Sticky Parity */
-#define LCR_EPS (1 << 4) /* Even Parity Select */
-#define LCR_PEN (1 << 3) /* Parity Enable */
-#define LCR_STB (1 << 2) /* Stop Bit */
-#define LCR_WLS1 (1 << 1) /* Word Length Select */
-#define LCR_WLS0 (1 << 0) /* Word Length Select */
-
-#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
-#define LSR_TEMT (1 << 6) /* Transmitter Empty */
-#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
-#define LSR_BI (1 << 4) /* Break Interrupt */
-#define LSR_FE (1 << 3) /* Framing Error */
-#define LSR_PE (1 << 2) /* Parity Error */
-#define LSR_OE (1 << 1) /* Overrun Error */
-#define LSR_DR (1 << 0) /* Data Ready */
-
-#define MCR_LOOP (1 << 4) /* */
-#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
-#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
-#define MCR_RTS (1 << 1) /* Request to Send */
-#define MCR_DTR (1 << 0) /* Data Terminal Ready */
-
-#define MSR_DCD (1 << 7) /* Data Carrier Detect */
-#define MSR_RI (1 << 6) /* Ring Indicator */
-#define MSR_DSR (1 << 5) /* Data Set Ready */
-#define MSR_CTS (1 << 4) /* Clear To Send */
-#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
-#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
-#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
-#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
-
-/******************************************************************************/
-/*
* IrSR (Infrared Selection Register)
*/
#define IrSR_OFFSET 0x20
diff --git a/drivers/serial/serial_pxa.c b/drivers/serial/serial_pxa.c
index 68469a4..4b98eba 100644
--- a/drivers/serial/serial_pxa.c
+++ b/drivers/serial/serial_pxa.c
@@ -1,4 +1,6 @@
/*
+ * Copyright (C) 2011 Marek Vasut <marek.va...@gmail.com>
+ *
* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, <w...@denx.de>
*
@@ -32,148 +34,161 @@
#include <watchdog.h>
#include <serial.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/regs-uart.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
-#define FFUART_INDEX 0
-#define BTUART_INDEX 1
-#define STUART_INDEX 2
+/*
+ * The numbering scheme differs here for PXA25x, PXA27x and PXA3xx so we can
+ * easily handle enabling of clock.
+ */
+#ifdef CONFIG_CPU_MONAHANS
+#define UART_CLK_BASE CKENA_21_BTUART
+#define UART_CLK_REG CKENA
+#define BTUART_INDEX 0
+#define FFUART_INDEX 1
+#define STUART_INDEX 2
+#elif CONFIG_PXA250
+#define UART_CLK_BASE (1 << 4) /* HWUART */
+#define UART_CLK_REG CKEN
+#define HWUART_INDEX 0
+#define STUART_INDEX 1
+#define FFUART_INDEX 2
+#define BTUART_INDEX 3
+#else /* PXA27x */
+#define UART_CLK_BASE CKEN5_STUART
+#define UART_CLK_REG CKEN
+#define STUART_INDEX 0
+#define FFUART_INDEX 1
+#define BTUART_INDEX 2
+#endif
+
+/*
+ * Only PXA250 has HWUART, to avoid poluting the code with more macros,
+ * artificially introduce this.
+ */
+#ifndef CONFIG_PXA250
+#define HWUART_INDEX 0xff
+#endif
#ifndef CONFIG_SERIAL_MULTI
-#if defined (CONFIG_FFUART)
+#if defined(CONFIG_FFUART)
#define UART_INDEX FFUART_INDEX
-#elif defined (CONFIG_BTUART)
+#elif defined(CONFIG_BTUART)
#define UART_INDEX BTUART_INDEX
-#elif defined (CONFIG_STUART)
+#elif defined(CONFIG_STUART)
#define UART_INDEX STUART_INDEX
+#elif defined(CONFIG_HWUART)
+#define UART_INDEX HWUART_INDEX
#else
-#error "Bad: you didn't configure serial ..."
+#error "Please select CONFIG_(FF|BT|ST|HW)UART in board config file."
#endif
#endif
-void pxa_setbrg_dev (unsigned int uart_index)
+uint32_t pxa_uart_get_baud_divider(void)
{
- unsigned int quot = 0;
-
if (gd->baudrate == 1200)
- quot = 768;
+ return 768;
else if (gd->baudrate == 9600)
- quot = 96;
+ return 96;
else if (gd->baudrate == 19200)
- quot = 48;
+ return 48;
else if (gd->baudrate == 38400)
- quot = 24;
+ return 24;
else if (gd->baudrate == 57600)
- quot = 16;
+ return 16;
else if (gd->baudrate == 115200)
- quot = 8;
- else
- hang ();
+ return 8;
+ else /* Unsupported baudrate */
+ return 0;
+}
+struct pxa_uart_regs *pxa_uart_index_to_regs(uint32_t uart_index)
+{
switch (uart_index) {
- case FFUART_INDEX:
-#ifdef CONFIG_CPU_MONAHANS
- writel(readl(CKENA) | CKENA_22_FFUART, CKENA);
-#else
- writel(readl(CKEN) | CKEN6_FFUART, CKEN);
-#endif /* CONFIG_CPU_MONAHANS */
-
- writel(0, FFIER); /* Disable for now */
- writel(0, FFFCR); /* No fifos enabled */
+ case FFUART_INDEX: return (struct pxa_uart_regs *)FFUART_BASE;
+ case BTUART_INDEX: return (struct pxa_uart_regs *)BTUART_BASE;
+ case STUART_INDEX: return (struct pxa_uart_regs *)STUART_BASE;
+ case HWUART_INDEX: return (struct pxa_uart_regs *)HWUART_BASE;
+ default:
+ return NULL;
+ }
+}
- /* set baud rate */
- writel(LCR_WLS0 | LCR_WLS1 | LCR_DLAB, FFLCR);
- writel(quot & 0xff, FFDLL);
- writel(quot >> 8, FFDLH);
- writel(LCR_WLS0 | LCR_WLS1, FFLCR);
+void pxa_uart_toggle_clock(uint32_t uart_index, int enable)
+{
+ uint32_t clk_reg, clk_offset, reg;
- writel(IER_UUE, FFIER); /* Enable FFUART */
- break;
+ clk_reg = UART_CLK_REG;
+ clk_offset = UART_CLK_BASE << uart_index;
- case BTUART_INDEX:
-#ifdef CONFIG_CPU_MONAHANS
- writel(readl(CKENA) | CKENA_21_BTUART, CKENA);
-#else
- writel(readl(CKEN) | CKEN7_BTUART, CKEN);
-#endif /* CONFIG_CPU_MONAHANS */
+ reg = readl(clk_reg);
- writel(0, BTIER);
- writel(0, BTFCR);
+ if (enable)
+ reg |= clk_offset;
+ else
+ reg &= ~clk_offset;
- /* set baud rate */
- writel(LCR_DLAB, BTLCR);
- writel(quot & 0xff, BTDLL);
- writel(quot >> 8, BTDLH);
- writel(LCR_WLS0 | LCR_WLS1, BTLCR);
+ writel(reg, clk_reg);
+}
- writel(IER_UUE, BTIER); /* Enable BFUART */
+/*
+ * Enable clock and set baud rate, parity etc.
+ */
+void pxa_setbrg_dev(uint32_t uart_index)
+{
+ uint32_t divider = 0;
+ struct pxa_uart_regs *uart_regs;
- break;
+ divider = pxa_uart_get_baud_divider();
+ if (!divider)
+ hang();
- case STUART_INDEX:
-#ifdef CONFIG_CPU_MONAHANS
- writel(readl(CKENA) | CKENA_23_STUART, CKENA);
-#else
- writel(readl(CKEN) | CKEN5_STUART, CKEN);
-#endif /* CONFIG_CPU_MONAHANS */
+ uart_regs = pxa_uart_index_to_regs(uart_index);
+ if (!uart_regs)
+ hang();
- writel(0, STIER);
- writel(0, STFCR);
+ pxa_uart_toggle_clock(uart_index, 1);
- /* set baud rate */
- writel(LCR_DLAB, STLCR);
- writel(quot & 0xff, STDLL);
- writel(quot >> 8, STDLH);
- writel(LCR_WLS0 | LCR_WLS1, STLCR);
+ /* Disable interrupts and FIFOs */
+ writel(0, &uart_regs->ier);
+ writel(0, &uart_regs->fcr);
- writel(IER_UUE, STIER); /* Enable STUART */
- break;
+ /* Set baud rate */
+ writel(LCR_WLS0 | LCR_WLS1 | LCR_DLAB, &uart_regs->lcr);
+ writel(divider & 0xff, &uart_regs->dll);
+ writel(divider >> 8, &uart_regs->dlh);
+ writel(LCR_WLS0 | LCR_WLS1, &uart_regs->lcr);
- default:
- hang();
- }
+ /* Enable UART */
+ writel(IER_UUE, &uart_regs->ier);
}
-
/*
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
*/
-int pxa_init_dev (unsigned int uart_index)
+int pxa_init_dev(unsigned int uart_index)
{
pxa_setbrg_dev (uart_index);
-
- return (0);
+ return 0;
}
-
/*
* Output a single byte to the serial port.
*/
-void pxa_putc_dev (unsigned int uart_index,const char c)
+void pxa_putc_dev(unsigned int uart_index, const char c)
{
- switch (uart_index) {
- case FFUART_INDEX:
- /* wait for room in the tx FIFO on FFUART */
- while ((readl(FFLSR) & LSR_TEMT) == 0)
- WATCHDOG_RESET (); /* Reset HW Watchdog,
if needed */
- writel(c, FFTHR);
- break;
-
- case BTUART_INDEX:
- while ((readl(BTLSR) & LSR_TEMT) == 0)
- WATCHDOG_RESET (); /* Reset HW Watchdog,
if needed */
- writel(c, BTTHR);
- break;
-
- case STUART_INDEX:
- while ((readl(STLSR) & LSR_TEMT) == 0)
- WATCHDOG_RESET (); /* Reset HW Watchdog,
if needed */
- writel(c, STTHR);
- break;
- }
+ struct pxa_uart_regs *uart_regs;
+
+ uart_regs = pxa_uart_index_to_regs(uart_index);
+ if (!uart_regs)
+ hang();
+
+ while (!(readl(&uart_regs->lsr) & LSR_TEMT))
+ WATCHDOG_RESET();
+ writel(c, &uart_regs->thr);
/* If \n, also do \r */
if (c == '\n')
@@ -185,17 +200,15 @@ void pxa_putc_dev (unsigned int uart_index,const char c)
* otherwise. When the function is succesfull, the character read is
* written into its argument c.
*/
-int pxa_tstc_dev (unsigned int uart_index)
+int pxa_tstc_dev(unsigned int uart_index)
{
- switch (uart_index) {
- case FFUART_INDEX:
- return readl(FFLSR) & LSR_DR;
- case BTUART_INDEX:
- return readl(BTLSR) & LSR_DR;
- case STUART_INDEX:
- return readl(STLSR) & LSR_DR;
- }
- return -1;
+ struct pxa_uart_regs *uart_regs;
+
+ uart_regs = pxa_uart_index_to_regs(uart_index);
+ if (!uart_regs)
+ return -1;
+
+ return readl(&uart_regs->lsr) & LSR_DR;
}
/*
@@ -203,187 +216,86 @@ int pxa_tstc_dev (unsigned int uart_index)
* otherwise. When the function is succesfull, the character read is
* written into its argument c.
*/
-int pxa_getc_dev (unsigned int uart_index)
+int pxa_getc_dev(unsigned int uart_index)
{
- switch (uart_index) {
- case FFUART_INDEX:
- while (!(readl(FFLSR) & LSR_DR))
- /* Reset HW Watchdog, if needed */
- WATCHDOG_RESET();
- return (char) readl(FFRBR) & 0xff;
-
- case BTUART_INDEX:
- while (!(readl(BTLSR) & LSR_DR))
- /* Reset HW Watchdog, if needed */
- WATCHDOG_RESET();
- return (char) readl(BTRBR) & 0xff;
- case STUART_INDEX:
- while (!(readl(STLSR) & LSR_DR))
- /* Reset HW Watchdog, if needed */
- WATCHDOG_RESET();
- return (char) readl(STRBR) & 0xff;
- }
- return -1;
-}
+ struct pxa_uart_regs *uart_regs;
-void
-pxa_puts_dev (unsigned int uart_index,const char *s)
-{
- while (*s) {
- pxa_putc_dev (uart_index,*s++);
- }
-}
+ uart_regs = pxa_uart_index_to_regs(uart_index);
+ if (!uart_regs)
+ return -1;
-#if defined (CONFIG_FFUART)
-static int ffuart_init(void)
-{
- return pxa_init_dev(FFUART_INDEX);
-}
-
-static void ffuart_setbrg(void)
-{
- return pxa_setbrg_dev(FFUART_INDEX);
-}
-
-static void ffuart_putc(const char c)
-{
- return pxa_putc_dev(FFUART_INDEX,c);
-}
-
-static void ffuart_puts(const char *s)
-{
- return pxa_puts_dev(FFUART_INDEX,s);
+ while (!(readl(&uart_regs->lsr) & LSR_DR))
+ WATCHDOG_RESET();
+ return readl(&uart_regs->rbr) & 0xff;
}
-static int ffuart_getc(void)
+void pxa_puts_dev(unsigned int uart_index, const char *s)
{
- return pxa_getc_dev(FFUART_INDEX);
+ while (*s)
+ pxa_putc_dev(uart_index, *s++);
}
-static int ffuart_tstc(void)
-{
- return pxa_tstc_dev(FFUART_INDEX);
-}
-
-struct serial_device serial_ffuart_device =
-{
- "serial_ffuart",
- ffuart_init,
- NULL,
- ffuart_setbrg,
- ffuart_getc,
- ffuart_tstc,
- ffuart_putc,
- ffuart_puts,
-};
+#define pxa_uart(uart, UART)
\
+ int uart##_init(void) \
+ { \
+ return pxa_init_dev(UART##_INDEX); \
+ } \
+ \
+ void uart##_setbrg(void) \
+ { \
+ return pxa_setbrg_dev(UART##_INDEX); \
+ } \
+ \
+ void uart##_putc(const char c) \
+ { \
+ return pxa_putc_dev(UART##_INDEX, c); \
+ } \
+ \
+ void uart##_puts(const char *s) \
+ { \
+ return pxa_puts_dev(UART##_INDEX, s); \
+ } \
+ \
+ int uart##_getc(void) \
+ { \
+ return pxa_getc_dev(UART##_INDEX); \
+ } \
+ \
+ int uart##_tstc(void) \
+ { \
+ return pxa_tstc_dev(UART##_INDEX); \
+ } \
+
+#define pxa_uart_desc(uart)
\
+ struct serial_device serial_##uart##_device = \
+ { \
+ "serial_"#uart, \
+ uart##_init, \
+ NULL, \
+ uart##_setbrg, \
+ uart##_getc, \
+ uart##_tstc, \
+ uart##_putc, \
+ uart##_puts, \
+ };
+
+#define pxa_uart_multi(uart, UART)
\
+ pxa_uart(uart, UART) \
+ pxa_uart_desc(uart)
+
+#if defined(CONFIG_HWUART)
+ pxa_uart_multi(hwuart, HWUART)
#endif
-
-#if defined (CONFIG_BTUART)
-static int btuart_init(void)
-{
- return pxa_init_dev(BTUART_INDEX);
-}
-
-static void btuart_setbrg(void)
-{
- return pxa_setbrg_dev(BTUART_INDEX);
-}
-
-static void btuart_putc(const char c)
-{
- return pxa_putc_dev(BTUART_INDEX,c);
-}
-
-static void btuart_puts(const char *s)
-{
- return pxa_puts_dev(BTUART_INDEX,s);
-}
-
-static int btuart_getc(void)
-{
- return pxa_getc_dev(BTUART_INDEX);
-}
-
-static int btuart_tstc(void)
-{
- return pxa_tstc_dev(BTUART_INDEX);
-}
-
-struct serial_device serial_btuart_device =
-{
- "serial_btuart",
- btuart_init,
- NULL,
- btuart_setbrg,
- btuart_getc,
- btuart_tstc,
- btuart_putc,
- btuart_puts,
-};
+#if defined(CONFIG_STUART)
+ pxa_uart_multi(stuart, STUART)
#endif
-
-#if defined (CONFIG_STUART)
-static int stuart_init(void)
-{
- return pxa_init_dev(STUART_INDEX);
-}
-
-static void stuart_setbrg(void)
-{
- return pxa_setbrg_dev(STUART_INDEX);
-}
-
-static void stuart_putc(const char c)
-{
- return pxa_putc_dev(STUART_INDEX,c);
-}
-
-static void stuart_puts(const char *s)
-{
- return pxa_puts_dev(STUART_INDEX,s);
-}
-
-static int stuart_getc(void)
-{
- return pxa_getc_dev(STUART_INDEX);
-}
-
-static int stuart_tstc(void)
-{
- return pxa_tstc_dev(STUART_INDEX);
-}
-
-struct serial_device serial_stuart_device =
-{
- "serial_stuart",
- stuart_init,
- NULL,
- stuart_setbrg,
- stuart_getc,
- stuart_tstc,
- stuart_putc,
- stuart_puts,
-};
+#if defined(CONFIG_FFUART)
+ pxa_uart_multi(ffuart, FFUART)
+#endif
+#if defined(CONFIG_BTUART)
+ pxa_uart_multi(btuart, BTUART)
#endif
-
-#ifndef CONFIG_SERIAL_MULTI
-inline int serial_init(void) {
- return (pxa_init_dev(UART_INDEX));
-}
-void serial_setbrg(void) {
- pxa_setbrg_dev(UART_INDEX);
-}
-int serial_getc(void) {
- return(pxa_getc_dev(UART_INDEX));
-}
-int serial_tstc(void) {
- return(pxa_tstc_dev(UART_INDEX));
-}
-void serial_putc(const char c) {
- pxa_putc_dev(UART_INDEX,c);
-}
-void serial_puts(const char *s) {
- pxa_puts_dev(UART_INDEX,s);
-}
-#endif /* CONFIG_SERIAL_MULTI */
+#ifndef CONFIG_SERIAL_MULTI
+ pxa_uart(serial, UART)
+#endif
--
1.7.5.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
