On Aug 1, 2011, at 10:47 AM, Kumar Gala wrote: > From: Andy Fleming <aflem...@freescale.com> > > Add support for RGMII, SGMII, and XAUI (10Gb) Ethernet on P4080DS. > > The board supports add-on cards for SGMII and XAUI functionality. Which > slots on the board these cards are in is a function of the SERDES option > selected and muxes on the board. > > Additionally because of the high-configurablity which MDIO bus one is > connected to is "selected" via an FPGA register. We create dummy MDIO > bus for the phy layer and hide the mux manipulation in this dummy layer. > > Add fman fdt helper function in board common code it'll be used by several > freescale boards that do various muxing of the MDIO signals based on which > controller/interface one is trying to talk to. > > Removed CONFIG_SYS_FMAN_FW as its not used anywhere. > > Signed-off-by: Mingkai Hu <mingkai...@freescale.com> > Signed-off-by: Andy Fleming <aflem...@freescale.com> > Signed-off-by: Timur Tabi <ti...@freescale.com> > Signed-off-by: Kumar Gala <ga...@kernel.crashing.org> > --- > * Fix checkpatch warning due to extern > > board/freescale/common/Makefile | 1 + > board/freescale/common/fman.c | 67 ++++ > board/freescale/common/fman.h | 26 ++ > board/freescale/corenet_ds/Makefile | 1 + > board/freescale/corenet_ds/corenet_ds.c | 10 +- > board/freescale/corenet_ds/corenet_ds.h | 25 ++ > board/freescale/corenet_ds/eth_p4080.c | 506 +++++++++++++++++++++++++++++++ > include/configs/corenet_ds.h | 4 +- > 8 files changed, 635 insertions(+), 5 deletions(-) > create mode 100644 board/freescale/common/fman.c > create mode 100644 board/freescale/common/fman.h > create mode 100644 board/freescale/corenet_ds/corenet_ds.h > create mode 100644 board/freescale/corenet_ds/eth_p4080.c
applied to 85xx next - k _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot