It is now responsibility of the board specific init code to set the environment variable corresponding to the MAC address.
Signed-off-by: Sanjeev Premi <pr...@ti.com> --- Changes in v2: - Ensure that environment variable is set iff it wasn't already set earlier. Tested on omap3evm at against latest master at: bd061a5 : Merge branch 'master' of git://git.denx.de/u-boot-sh To build successfully, make this substituion in board/ti/evm/evm.c: -#include <asm/arch/gpio.h> +#include <asm/omap_gpio.h> This problem was addressed in separate RFC. Patches will follow shortly. (Substituion is not real fix). board/ti/evm/evm.c | 15 +++++++++++++++ 1 files changed, 15 insertions(+), 0 deletions(-) diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c index 30c1c57..ae3f713 100644 --- a/board/ti/evm/evm.c +++ b/board/ti/evm/evm.c @@ -216,7 +216,22 @@ int board_eth_init(bd_t *bis) { int rc = 0; #ifdef CONFIG_SMC911X +#define STR_ENV_ETHADDR "ethaddr" + + struct eth_device *dev; + uchar eth_addr[6]; + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); + + if (!eth_getenv_enetaddr(STR_ENV_ETHADDR, eth_addr)) { + dev = eth_get_dev_by_index(0); + if (dev) { + eth_setenv_enetaddr(STR_ENV_ETHADDR, dev->enetaddr); + } else { + printf("omap3evm: Couldn't get eth device\n"); + rc = -1; + } + } #endif return rc; } -- 1.7.0.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot