Hi Sandeep, Le 08/09/2011 17:16, s-paul...@ti.com a écrit : > Albert, > > Please pull u-boot-ti/master. > I checked all the patches for checkpatch errors and fixed > all the warnings that i could. Some cannot be fixed. > Sanjeev's patches update thr GPIO for OMAP. The GPIO on OMAP > was causing issues which now seem to be fixed. > > Regards, > Sandeep > > The following changes since commit 63cf97e825b8d821e2d3d6d6c6604634ac24810a: > Sanjeev Premi (1): > omap3: beagle: Fix build warning > > are available in the git repository at: > > git://git.denx.de/u-boot-ti.git master > > Aneesh V (4): > omap4: factor out common part from board config headers > omap4: make SDRAM init work for ES1.0 silicon > omap4: IO settings > omap4: fix pad configuration settings for SDP and Panda > > Howard D. Gray (1): > ARMV7: OMAP3: Add 37xx ESx revision numbers. > > Jason Kridner (1): > led: remove camel casing of led identifiers globally > > Joel A Fernandes (1): > OMAP: Add function to get state of a GPIO output > > Michael Jones (2): > ARMV7: OMAP: Write more than 1 byte at a time in i2c_write > ARMV7: OMAP: I2C driver: cosmetic: make checkpatch-compatible > > Nagabhushana Netagunte (3): > da830: modify the U-Boot prompt string > da830: enable SPI flash boot mode > da830: modify the MEMTEST start and end address > > Sandeep Paulraj (1): > OMAP3 Beagle: Minor config cleanup > > Sanjeev Premi (3): > omap: gpio: Use generic API > omap: gpio: generic changes after changing API > omap: gpio: Adapt board files to use generic API > > arch/arm/cpu/arm920t/ep93xx/led.c | 24 ++-- > arch/arm/cpu/arm926ejs/at91/led.c | 12 +- > arch/arm/cpu/armv7/omap-common/gpio.c | 105 ++++++++++-- > arch/arm/cpu/armv7/omap3/sys_info.c | 13 ++- > arch/arm/cpu/armv7/omap4/board.c | 62 +++++++ > arch/arm/cpu/armv7/omap4/clocks.c | 5 +- > arch/arm/cpu/armv7/omap4/emif.c | 72 +------- > arch/arm/cpu/armv7/omap4/sdram_elpida.c | 24 ++-- > arch/arm/include/asm/arch-omap3/omap3.h | 10 + > arch/arm/include/asm/arch-omap4/emif.h | 23 +--- > arch/arm/include/asm/arch-omap4/omap4.h | 45 +++++- > arch/arm/include/asm/omap_gpio.h | 13 -- > arch/arm/lib/board.c | 32 ++-- > board/atmel/at91rm9200ek/led.c | 12 +- > board/cm_t35/leds.c | 10 +- > board/comelit/dig297/dig297.c | 12 +- > board/eukrea/cpu9260/led.c | 48 +++--- > board/isee/igep0020/igep0020.c | 12 +- > board/logicpd/zoom2/debug_board.c | 10 +- > board/logicpd/zoom2/led.c | 66 ++++---- > board/logicpd/zoom2/zoom2.c | 10 +- > board/overo/overo.c | 54 +++--- > board/ti/beagle/beagle.c | 44 +++--- > board/ti/beagle/led.c | 26 ++-- > board/ti/evm/evm.c | 12 +- > board/ti/panda/panda_mux_data.h | 41 ++--- > board/ti/sdp4430/sdp4430_mux_data.h | 9 +- > common/cmd_led.c | 8 +- > doc/README.omap3 | 20 +- > drivers/i2c/omap24xx_i2c.c | 241 +++++++++++++--------------- > include/configs/da830evm.h | 17 +- > include/configs/omap3_beagle.h | 1 - > include/configs/omap4_common.h | 275 > +++++++++++++++++++++++++++++++ > include/configs/omap4_panda.h | 244 +-------------------------- > include/configs/omap4_sdp4430.h | 245 +-------------------------- > include/status_led.h | 32 ++-- > 36 files changed, 892 insertions(+), 997 deletions(-) > create mode 100644 include/configs/omap4_common.h
Rebasing and applying locally right now. What are these warnings that cannot be eliminated? Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot