Don't allocate NAND buffers as one block, but allocate them separately. This
allows systems where DMA to buffers happen to allocate these buffers properly
aligned.
Signed-off-by: Marek Vasut <marek.va...@gmail.com>
Cc: Scott Wood <scottw...@freescale.com>
Cc: Stefano Babic <sba...@denx.de>
Cc: Wolfgang Denk <w...@denx.de>
Cc: Detlev Zundel <d...@denx.de>
---
drivers/mtd/nand/nand_base.c | 30 +++++++++++++++++++++++-------
include/linux/mtd/nand.h | 7 ++++---
2 files changed, 27 insertions(+), 10 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index d8d30e3..3093067 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2749,13 +2749,27 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
*/
int nand_scan_tail(struct mtd_info *mtd)
{
- int i;
+ int i, bufsize;
+ uint8_t *buf;
struct nand_chip *chip = mtd->priv;
- if (!(chip->options & NAND_OWN_BUFFERS))
- chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL);
- if (!chip->buffers)
- return -ENOMEM;
+ if (!(chip->options & NAND_OWN_BUFFERS)) {
+ chip->buffers = malloc(sizeof(struct nand_buffers));
+ if (!chip->buffers)
+ return -ENOMEM;
+
+ bufsize = NAND_MAX_PAGESIZE + (3 * NAND_MAX_OOBSIZE);
+ buf = malloc(bufsize);
+ if (!buf) {
+ free(chip->buffers);
+ return -ENOMEM;
+ }
+
+ chip->buffers->buffer = buf;
+ chip->buffers->ecccalc = buf;
+ chip->buffers->ecccode = buf + NAND_MAX_OOBSIZE;
+ chip->buffers->databuf = buf + (2 * NAND_MAX_OOBSIZE);
+ }
/* Set the internal oob buffer location, just after the page data */
chip->oob_poi = chip->buffers->databuf + mtd->writesize;
@@ -2996,6 +3010,8 @@ void nand_release(struct mtd_info *mtd)
/* Free bad block table memory */
kfree(chip->bbt);
- if (!(chip->options & NAND_OWN_BUFFERS))
- kfree(chip->buffers);
+ if (!(chip->options & NAND_OWN_BUFFERS)) {
+ free(chip->buffers->buffer);
+ free(chip->buffers);
+ }
}
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 987a2ec..c3449a9 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -370,9 +370,10 @@ struct nand_ecc_ctrl {
* consecutive order.
*/
struct nand_buffers {
- uint8_t ecccalc[NAND_MAX_OOBSIZE];
- uint8_t ecccode[NAND_MAX_OOBSIZE];
- uint8_t databuf[NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE];
+ uint8_t *buffer;
+ uint8_t *ecccalc;
+ uint8_t *ecccode;
+ uint8_t *databuf;
};
/**
--
1.7.5.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
