Signed-off-by: Heiko Schocher <h...@denx.de>
Cc: Paulraj Sandeep <s-paul...@ti.com>
Cc: Albert ARIBAUD <albert.u.b...@aribaud.net>
---
arch/arm/cpu/arm926ejs/davinci/Makefile | 1 +
arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c | 428 ++++++++++++++++++++
.../arm/include/asm/arch-davinci/am1808_lowlevel.h | 44 ++
3 files changed, 473 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
create mode 100644 arch/arm/include/asm/arch-davinci/am1808_lowlevel.h
diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile
b/arch/arm/cpu/arm926ejs/davinci/Makefile
index b38623a..0310957 100644
--- a/arch/arm/cpu/arm926ejs/davinci/Makefile
+++ b/arch/arm/cpu/arm926ejs/davinci/Makefile
@@ -28,6 +28,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
COBJS-y += cpu.o timer.o psc.o
+COBJS-$(CONFIG_AM18018_LOWLEVEL) += am1808_lowlevel.o
COBJS-$(CONFIG_SOC_DM355) += dm355.o
COBJS-$(CONFIG_SOC_DM365) += dm365.o
COBJS-$(CONFIG_SOC_DM644X) += dm644x.o
diff --git a/arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
b/arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
new file mode 100644
index 0000000..1ea4a9f
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
@@ -0,0 +1,428 @@
+/*
+ * SoC-specific lowlevel code for AM1808 and similar chips
+ *
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, h...@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <common.h>
+#include <nand.h>
+#include <ns16550.h>
+#include <post.h>
+#include <asm/arch/am1808_lowlevel.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/ddr2_defs.h>
+#include <asm/arch/emif_defs.h>
+
+void am1808_waitloop(unsigned long loopcnt)
+{
+ unsigned long i;
+
+ for (i = 0; i < loopcnt; i++)
+ asm(" NOP");
+}
+
+int am1808_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
+{
+ if (reg == davinci_pllc0_regs)
+ /* Unlock PLL registers. */
+ clrbits_le32(&davinci_syscfg_regs->cfgchip0, 0x00000010);
+
+ /*
+ * Set PLLENSRC '0',bit 5, PLL Enable(PLLEN) selection is controlled
+ * through MMR
+ */
+ clrbits_le32(®->pllctl, 0x00000020);
+ /* PLLCTL.EXTCLKSRC bit 9 should be left at 0 for Freon */
+ clrbits_le32(®->pllctl, 0x00000200);
+
+ /* Set PLLEN=0 => PLL BYPASS MODE */
+ clrbits_le32(®->pllctl, 0x00000001);
+
+ am1808_waitloop(150);
+
+ if (reg == davinci_pllc0_regs) {
+ /*
+ * Select the Clock Mode bit 8 as External Clock or On Chip
+ * Oscilator
+ */
+ dv_maskbits(®->pllctl, 0xFFFFFEFF);
+ setbits_le32(®->pllctl, (CONFIG_SYS_DV_CLKMODE << 8));
+ }
+
+ /* Clear PLLRST bit to reset the PLL */
+ clrbits_le32(®->pllctl, 0x00000008);
+
+ /* Disable the PLL output */
+ setbits_le32(®->pllctl, 0x00000010);
+
+ /* PLL initialization sequence */
+ /*
+ * Power up the PLL- PWRDN bit set to 0 to bring the PLL out of
+ * power down bit
+ */
+ clrbits_le32(®->pllctl, 0x00000002);
+
+ /* Enable the PLL from Disable Mode PLLDIS bit to 0 */
+ clrbits_le32(®->pllctl, 0x00000010);
+
+ /* Program the required multiplier value in PLLM */
+ writel(pllmult, ®->pllm);
+
+ /* program the postdiv */
+ if (reg == davinci_pllc0_regs)
+ writel((0x8000 | CONFIG_SYS_AM1808_PLL0_POSTDIV),
+ ®->postdiv);
+ else
+ writel((0x8000 | CONFIG_SYS_AM1808_PLL1_POSTDIV),
+ ®->postdiv);
+
+ /*
+ * Check for the GOSTAT bit in PLLSTAT to clear to 0 to indicate that
+ * no GO operation is currently in progress
+ */
+ while ((readl(®->pllstat) & 0x1) == 1)
+ ;
+
+ if (reg == davinci_pllc0_regs) {
+ writel(CONFIG_SYS_AM1808_PLL0_PLLDIV1, ®->plldiv1);
+ writel(CONFIG_SYS_AM1808_PLL0_PLLDIV2, ®->plldiv2);
+ writel(CONFIG_SYS_AM1808_PLL0_PLLDIV3, ®->plldiv3);
+ writel(CONFIG_SYS_AM1808_PLL0_PLLDIV4, ®->plldiv4);
+ writel(CONFIG_SYS_AM1808_PLL0_PLLDIV5, ®->plldiv5);
+ writel(CONFIG_SYS_AM1808_PLL0_PLLDIV6, ®->plldiv6);
+ writel(CONFIG_SYS_AM1808_PLL0_PLLDIV7, ®->plldiv7);
+ } else {
+ writel(CONFIG_SYS_AM1808_PLL1_PLLDIV1, ®->plldiv1);
+ writel(CONFIG_SYS_AM1808_PLL1_PLLDIV2, ®->plldiv2);
+ writel(CONFIG_SYS_AM1808_PLL1_PLLDIV3, ®->plldiv3);
+ }
+
+ /*
+ * Set the GOSET bit in PLLCMD to 1 to initiate a new divider
+ * transition.
+ */
+ setbits_le32(®->pllcmd, 0x01);
+
+ /*
+ * Wait for the GOSTAT bit in PLLSTAT to clear to 0
+ * (completion of phase alignment).
+ */
+ while ((readl(®->pllstat) & 0x1) == 1)
+ ;
+
+ /* Wait for PLL to reset properly. See PLL spec for PLL reset time */
+ am1808_waitloop(200);
+
+ /* Set the PLLRST bit in PLLCTL to 1 to bring the PLL out of reset */
+ setbits_le32(®->pllctl, 0x00000008);
+
+ /* Wait for PLL to lock. See PLL spec for PLL lock time */
+ am1808_waitloop(2400);
+
+ /*
+ * Set the PLLEN bit in PLLCTL to 1 to remove the PLL from bypass
+ * mode
+ */
+ setbits_le32(®->pllctl, 0x00000001);
+
+
+ /*
+ * clear EMIFA and EMIFB clock source settings, let them
+ * run off SYSCLK
+ */
+ if (reg == davinci_pllc0_regs)
+ dv_maskbits(&davinci_syscfg_regs->cfgchip3, 0xFFFFFFF8);
+
+ return 0;
+}
+
+void am1808_lpc_transition(unsigned char pscnum, unsigned char module,
+ unsigned char domain, unsigned char state)
+{
+ struct davinci_psc_regs *reg;
+ dv_reg_p mdstat, mdctl;
+
+ if (pscnum == 0) {
+ reg = davinci_psc0_regs;
+ mdstat = ®->psc0.mdstat[module];
+ mdctl = ®->psc0.mdctl[module];
+ } else {
+ reg = davinci_psc1_regs;
+ mdstat = ®->psc1.mdstat[module];
+ mdctl = ®->psc1.mdctl[module];
+ }
+
+ /* Wait for any outstanding transition to complete */
+ while ((readl(®->ptstat) & (0x00000001 << domain)))
+ ;
+
+ /* If we are already in that state, just return */
+ if ((readl(mdstat) & 0x1F) == state)
+ return;
+
+ /* Perform transition */
+ writel((readl(mdctl) & 0xFFFFFFE0) | state, mdctl);
+ setbits_le32(®->ptcmd, (0x00000001 << domain));
+
+ /* Wait for transition to complete */
+ while (readl(®->ptstat) & (0x00000001 << domain))
+ ;
+
+ /* Wait and verify the state */
+ while ((readl(mdstat) & 0x1F) != state)
+ ;
+}
+
+int am1808_ddr_setup(unsigned int freq)
+{
+ unsigned long tmp;
+
+ /* Enable the Clock to DDR2/mDDR */
+ am1808_lpc_transition(1, 6, 0, PSC_ENABLE);
+
+ tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
+ if ((tmp & VTP_POWERDWN) == VTP_POWERDWN) {
+ /* Begin VTP Calibration */
+ clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
+ clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
+ clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
+
+ /* Polling READY bit to see when VTP calibration is done */
+ tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
+ while ((tmp & VTP_READY) != VTP_READY)
+ tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
+
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
+
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN);
+ }
+
+ writel(CONFIG_SYS_AM1808_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
+ clrbits_le32(&davinci_syscfg1_regs->ddr_slew,
+ (1 << DDR_SLEW_CMOSEN_BIT));
+
+ setbits_le32(&dv_ddr2_regs_ctrl->sdbcr, DV_DDR_BOOTUNLOCK);
+
+ writel((CONFIG_SYS_AM1808_DDR2_SDBCR & ~0xf0000000) |
+ (readl(&dv_ddr2_regs_ctrl->sdbcr) & 0xf0000000), /*rsv Bytes*/
+ &dv_ddr2_regs_ctrl->sdbcr);
+ writel(CONFIG_SYS_AM1808_DDR2_SDBCR2, &dv_ddr2_regs_ctrl->sdbcr2);
+
+ writel(CONFIG_SYS_AM1808_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
+ writel(CONFIG_SYS_AM1808_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
+
+ clrbits_le32(&dv_ddr2_regs_ctrl->sdbcr,
+ (1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT));
+
+ /*
+ * LPMODEN and MCLKSTOPEN must be set!
+ * Without this bits set, PSC don;t switch states !!
+ */
+ writel(CONFIG_SYS_AM1808_DDR2_SDRCR |
+ (1 << DV_DDR_SRCR_LPMODEN_SHIFT) |
+ (1 << DV_DDR_SRCR_MCLKSTOPEN_SHIFT),
+ &dv_ddr2_regs_ctrl->sdrcr);
+
+ /* SyncReset the Clock to EMIF3A SDRAM */
+ am1808_lpc_transition(1, 6, 0, PSC_SYNCRESET);
+ /* Enable the Clock to EMIF3A SDRAM */
+ am1808_lpc_transition(1, 6, 0, PSC_ENABLE);
+
+ /* disable self refresh */
+ clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr, 0xc0000000);
+ writel(0x30, &dv_ddr2_regs_ctrl->pbbpr);
+
+ return 0;
+}
+
+static void am1808_set_mdctl(dv_reg_p mdctl)
+{
+ if ((readl(mdctl) & 0x1F) != PSC_ENABLE)
+ writel(((readl(mdctl) & 0xFFFFFFE0) | PSC_ENABLE), mdctl);
+}
+
+void am1808_psc_init(void)
+{
+ struct davinci_psc_regs *reg;
+ int i;
+
+ /* PSC 0 domain 0 init */
+ reg = davinci_psc0_regs;
+ while ((readl(®->ptstat) & 0x00000001))
+ ;
+
+ for (i = 3; i <= 4 ; i++)
+ am1808_set_mdctl(®->psc0.mdctl[i]);
+
+ for (i = 7; i <= 12 ; i++)
+ am1808_set_mdctl(®->psc0.mdctl[i]);
+
+ /* Do Always-On Power Domain Transitions */
+ setbits_le32(®->ptcmd, 0x00000001);
+ while (readl(®->ptstat) & 0x00000001)
+ ;
+
+ /* PSC1, domain 1 init */
+ reg = davinci_psc1_regs;
+ while ((readl(®->ptstat) & 0x00000001))
+ ;
+
+ am1808_set_mdctl(®->psc1.mdctl[3]);
+ am1808_set_mdctl(®->psc1.mdctl[6]);
+
+ /* UART1 + UART2 */
+ for (i = 12 ; i <= 13 ; i++)
+ am1808_set_mdctl(®->psc1.mdctl[i]);
+
+ am1808_set_mdctl(®->psc1.mdctl[26]);
+ am1808_set_mdctl(®->psc1.mdctl[31]);
+
+ /* Do Always-On Power Domain Transitions */
+ setbits_le32(®->ptcmd, 0x00000001);
+ while (readl(®->ptstat) & 0x00000001)
+ ;
+}
+
+void am1808_pinmux_ctl(unsigned long offset, unsigned long mask,
+ unsigned long value)
+{
+ clrbits_le32(&davinci_syscfg_regs->pinmux[offset], mask);
+ setbits_le32(&davinci_syscfg_regs->pinmux[offset], (mask & value));
+}
+
+__attribute__((weak))
+void board_gpio_init(void)
+{
+ return;
+}
+
+#if defined(CONFIG_NAND_SPL)
+void nand_boot(void)
+{
+ __attribute__((noreturn)) void (*uboot)(void);
+
+ /* copy image from NOR to RAM */
+ memcpy((void *)CONFIG_SYS_NAND_U_BOOT_DST,
+ (void *)CONFIG_SYS_NAND_U_BOOT_OFFS,
+ CONFIG_SYS_NAND_U_BOOT_SIZE);
+
+ /* and jump to it ... */
+ uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
+ (*uboot)();
+}
+#endif
+
+#if defined(CONFIG_NAND_SPL)
+void board_init_f(ulong bootflag)
+#else
+int arch_cpu_init(void)
+#endif
+{
+ /*
+ * copied from arch/arm/cpu/arm926ejs/start.S
+ *
+ * flush v4 I/D caches
+ */
+ asm("mov r0, #0");
+ asm("mcr p15, 0, r0, c7, c7, 0"); /* flush v3/v4 cache */
+ asm("mcr p15, 0, r0, c8, c7, 0"); /* flush v4 TLB */
+
+ /*
+ * disable MMU stuff and caches
+ */
+ asm("mrc p15, 0, r0, c1, c0, 0");
+ /* clear bits 13, 9:8 (--V- --RS) */
+ asm("bic r0, r0, #0x00002300");
+ /* clear bits 7, 2:0 (B--- -CAM) */
+ asm("bic r0, r0, #0x00000087");
+ /* set bit 2 (A) Align */
+ asm("orr r0, r0, #0x00000002");
+ /* set bit 12 (I) I-Cache */
+ asm("orr r0, r0, #0x00001000");
+ asm("mcr p15, 0, r0, c1, c0, 0");
+
+ /* Unlock kick registers */
+ writel(0x83e70b13, &davinci_syscfg_regs->kick0);
+ writel(0x95a4f1e0, &davinci_syscfg_regs->kick1);
+
+ dv_maskbits(&davinci_syscfg_regs->suspsrc,
+ ((1 << 27) | (1 << 22) | (1 << 20) | (1 << 5) | (1 << 16)));
+
+ /* System PSC setup - enable all */
+ am1808_psc_init();
+
+ /* Setup Pinmux */
+ am1808_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX0);
+ am1808_pinmux_ctl(1, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX1);
+ am1808_pinmux_ctl(2, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX2);
+ am1808_pinmux_ctl(3, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX3);
+ am1808_pinmux_ctl(4, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX4);
+ am1808_pinmux_ctl(5, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX5);
+ am1808_pinmux_ctl(6, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX6);
+ am1808_pinmux_ctl(7, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX7);
+ am1808_pinmux_ctl(8, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX8);
+ am1808_pinmux_ctl(9, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX9);
+ am1808_pinmux_ctl(10, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX10);
+ am1808_pinmux_ctl(11, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX11);
+ am1808_pinmux_ctl(12, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX12);
+ am1808_pinmux_ctl(13, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX13);
+ am1808_pinmux_ctl(14, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX14);
+ am1808_pinmux_ctl(15, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX15);
+ am1808_pinmux_ctl(16, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX16);
+ am1808_pinmux_ctl(17, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX17);
+ am1808_pinmux_ctl(18, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX18);
+ am1808_pinmux_ctl(19, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX19);
+
+ /* PLL setup */
+ am1808_pll_init(davinci_pllc0_regs, CONFIG_SYS_AM1808_PLL0_PLLM);
+ am1808_pll_init(davinci_pllc1_regs, CONFIG_SYS_AM1808_PLL1_PLLM);
+
+ /* GPIO setup */
+ board_gpio_init();
+
+ /* setup CSn config */
+ writel(CONFIG_SYS_AM1808_CS2CFG, &davinci_emif_regs->ab1cr);
+ writel(CONFIG_SYS_AM1808_CS3CFG, &davinci_emif_regs->ab2cr);
+
+ am1808_lpc_transition(1, 13, 0, PSC_ENABLE);
+ NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1),
+ CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+
+ /*
+ * Fix Power and Emulation Management Register
+ * see sprufw3a.pdf page 37 Table 24
+ */
+ writel(readl((CONFIG_SYS_NS16550_COM1 + 0x30)) | 0x00006001,
+ (CONFIG_SYS_NS16550_COM1 + 0x30));
+#if defined(CONFIG_NAND_SPL)
+ puts("ddr init\n");
+ am1808_ddr_setup(132);
+
+ puts("boot u-boot ...\n");
+
+ nand_boot();
+#else
+ am1808_ddr_setup(132);
+ return 0;
+#endif
+}
diff --git a/arch/arm/include/asm/arch-davinci/am1808_lowlevel.h
b/arch/arm/include/asm/arch-davinci/am1808_lowlevel.h
new file mode 100644
index 0000000..0bc7f76
--- /dev/null
+++ b/arch/arm/include/asm/arch-davinci/am1808_lowlevel.h
@@ -0,0 +1,44 @@
+/*
+ * SoC-specific lowlevel code for AM1808 and similar chips
+ *
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, h...@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __AM1808_LOWLEVEL_H
+#define __AM1808_LOWLEVEL_H
+
+/* NOR Boot Configuration Word Field Descriptions */
+#define AM1808_NORBOOT_COPY_XK(X) ((X - 1) << 8)
+#define AM1808_NORBOOT_METHOD_DIRECT (1 << 4)
+#define AM1808_NORBOOT_16BIT (1 << 0)
+
+#define dv_maskbits(addr, val) \
+ writel((readl(addr) & val), addr)
+
+void am1808_waitloop(unsigned long loopcnt);
+int am1808_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult);
+void am1808_lpc_transition(unsigned char pscnum, unsigned char module,
+ unsigned char domain, unsigned char state);
+int am1808_ddr_setup(unsigned int freq);
+void am1808_psc_init(void);
+void am1808_pinmux_ctl(unsigned long offset, unsigned long mask,
+ unsigned long value);
+
+#endif /* #ifndef __AM1808_LOWLEVEL_H */
--
1.7.6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
