Hi Heiko,
On 09/15/11 08:59, Heiko Schocher wrote:
> - booting from NOR Flash with direct boot method
> - POST support
> - LOGBUF support
>
> Signed-off-by: Heiko Schocher <h...@denx.de>
> Cc: Paulraj Sandeep <s-paul...@ti.com>
> Cc: Albert ARIBAUD <albert.u.b...@aribaud.net>
> ---
[...]
> diff --git a/board/enbw/enbw_cmc/enbw_cmc.c b/board/enbw/enbw_cmc/enbw_cmc.c
> new file mode 100644
> index 0000000..1b9ee67
> --- /dev/null
> +++ b/board/enbw/enbw_cmc/enbw_cmc.c
[...]
> +
> +int board_init(void)
> +{
> +#ifndef CONFIG_USE_IRQ
> + irq_init();
> +#endif
> +
> + /* arch number of the board */
> + gd->bd->bi_arch_number = 3585;
There is a new standard option for assigning the machid.
Now, this should be done in the board config file and the above two lines
removed.
Please, see the CONFIG_MACH_TYPE in the U-Boot documentation (README file).
[...]
> diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h
> new file mode 100644
> index 0000000..5de752f
> --- /dev/null
> +++ b/include/configs/enbw_cmc.h
[...]
> +/*
> + * Board
> + */
> +#define CONFIG_DRIVER_TI_EMAC
> +#define CONFIG_USE_NAND
Consider adding here:
#define MACH_TYPE_ENBW_CMC 3585
#define CONFIG_MACH_TYPE MACH_TYPE_ENBW_CMC
[...]
--
Regards,
Igor.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
