> -----Original Message----- > From: Simon Glass [mailto:s...@chromium.org] > Sent: Thursday, September 08, 2011 3:12 PM > To: U-Boot Mailing List > Cc: Albert ARIBAUD; Tom Warren; Simon Glass > Subject: [PATCH 0/6] tegra2: Add more clock/pinmux functionality > > This adds to the basic clock functionality already available. The concept > of a peripheral ID is introduced, and all peripheral clock access is done > using this ID. > > Functions are provided to start, query and adjust peripheral clocks, > including automatic selection of the best available clock based on the > requested rate (this replaces hard-coded divisors). > > On the pinmux side we can now select functions for pin groups using the > new pinmux_set_func() function. > > Expanded functions are provided to adjust and query PLL clocks. > > With a full compliment of clock and pinmux functions, it should no longer > be necessary for board/driver code to directly access clock registers. This > change removes all such accesses. > > This functionality will be used for I2C, SPI, LCD, USB, keyboard, NAND and > other drivers for Tegra2. > > At then end is a patch to enable MMC on Seaboard, to make it all worthwhile. > > Note: These patches include a definition of assert() which I will happily > remove if the one sent upstream is accepted. > > > Simon Glass (6): > tegra2: Rename CLOCK_PLL_ID to CLOCK_ID > tegra2: Clean up board code a little > tegra2: Add more clock functions > tegra2: Rename PIN_ to PINGRP_ > tegra2: Add more pinmux functions > tegra2: Enable MMC for Seaboard > > arch/arm/cpu/armv7/tegra2/ap20.c | 5 +- > arch/arm/cpu/armv7/tegra2/clock.c | 840 > +++++++++++++++++++++++++++- > arch/arm/cpu/armv7/tegra2/pinmux.c | 540 ++++++++++++++++++- > arch/arm/include/asm/arch-tegra2/clk_rst.h | 84 +-- > arch/arm/include/asm/arch-tegra2/clock.h | 149 ++++- > arch/arm/include/asm/arch-tegra2/pinmux.h | 444 ++++++++++----- > board/nvidia/common/board.c | 243 +++------ > board/nvidia/common/board.h | 4 +- > board/nvidia/harmony/harmony.c | 26 + > board/nvidia/seaboard/seaboard.c | 35 ++- > drivers/mmc/tegra2_mmc.c | 94 +-- > drivers/mmc/tegra2_mmc.h | 1 + > 12 files changed, 1972 insertions(+), 493 deletions(-) > > -- > 1.7.3.1
This works fine on my Seaboard (T20-A03). My Harmony is put away, so I didn't test on it. Tested-by: Tom Warren <twar...@nvidia.com> Thanks, Tom ----------------------------------------------------------------------------------- This email message is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. ----------------------------------------------------------------------------------- _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
