Hi Sandeep, Le 23/09/2011 22:58, s-paul...@ti.com a écrit : > Albert, > > Please pull u-boot-ti/next into arm/next > I checked all the patches i applied for checkpatch errors and saw 2, both > of which cannot be fixed. Checkpatch complained about the location of the > header file. It expects things to be like linux. > I ran MAKEALL for davinci, omap3 and omap4 and saw no issues. > > Regards, > Sandeep > > The following changes since commit 2cfb66ee61104af65eead73f634c373fec6bc827: > Sandeep Paulraj (1): > devkit8000: Fix build break > > are available in the git repository at: > > git://git.denx.de/u-boot-ti.git next > > Aneesh V (1): > omap4: update maintainer for omap4 boards > > Balaji T K (2): > mmc: omap: enable high capacity > mmc: omap: config VMMC, MMC1_PBIAS > > Heiko Schocher (16): > i2c, davinci: add i2c set speed > net, davinci_emac: add KSZ8864 switch > net, davinci_emac: make less verbose - turn printf() into debug() > net, davinci_emac: let the EMAC detect the PHYs > arm, davinci: move davinci_timer in header file > arm, davinci: add missing timer baseaddresses for !DA8xx cpu > arm, davinci: add internal WDT support for AM1808 cpus > arm, davinci: add RTC base addr > rtc, davinci: add support for davinci internal RTC > arm, davinci: add SYSCFG1 base and register struct > arm, davinci: add some missing defines in hardware.h > arm, davinci, am1808, gpio: add missing defines for bank 8 > arm, davinci: add ddr2 definition > arm, davinci: add NOR Boot Configuration Word > arm, davinci, am1808: add lowlevel functions for booting from NOR > arm, davinci, da8xx: add cpuinfo > > Sanjeev Premi (2): > omap3: Fix compile warning > omap3evm: env: Fix default console > > Thomas Weber (1): > Devkit8000: Change console from ttyS2 to ttyO2
Applied to u-boot-arm/next, thanks! Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot