On 09/30/2011 03:04 PM, Steve Sakoman wrote:
> This pad was previously configured for sysclkout_1. This patch changes
> the configuration to gpio_10 to reduce radiated noise from the 26Mhz
> clock, as well as make the pin more generally useful.
>
> Signed-off-by: Steve Sakoman<st...@sakoman.com>
Acked-by: Philip Balister <phi...@opensdr.com>
> ---
>
> diff --git a/board/overo/overo.h b/board/overo/overo.h
> index d394f90..42ef1b1 100644
> --- a/board/overo/overo.h
> +++ b/board/overo/overo.h
> @@ -290,7 +290,7 @@ const omap3_sysinfo sysinfo = {
> MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\
> MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\
> MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0))
> /*SYS_OFF_MODE*/\
> - MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0))
> /*SYS_CLKOUT1*/\
> + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTU | EN | M4)) /*GPIO_10*/\
> MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\
> MUX_VAL(CP(ETK_CLK_ES2), (IEN | PTU | EN | M2)) /*MMC3_CLK*/\
> MUX_VAL(CP(ETK_CTL_ES2), (IEN | PTU | EN | M2)) /*MMC3_CMD*/\
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
