From: Bastian Ruppert <bastian.rupp...@sewerin.de>
Signed-off-by: Bastian Ruppert <bastian.rupp...@sewerin.de>
Signed-off-by: Stefano Babic <sba...@denx.de>
CC: Sandeep Paulraj <s-paul...@ti.com>
---
arch/arm/include/asm/arch-davinci/hardware.h | 2 +-
board/davinci/ea20/ea20.c | 16 ++++++++--------
include/configs/ea20.h | 2 +-
3 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/include/asm/arch-davinci/hardware.h
b/arch/arm/include/asm/arch-davinci/hardware.h
index b6a3209..2063c66 100644
--- a/arch/arm/include/asm/arch-davinci/hardware.h
+++ b/arch/arm/include/asm/arch-davinci/hardware.h
@@ -451,7 +451,7 @@ struct davinci_syscfg_regs {
#define DAVINCI_SYSCFG_SUSPSRC_I2C (1 << 16)
#define DAVINCI_SYSCFG_SUSPSRC_SPI0 (1 << 21)
#define DAVINCI_SYSCFG_SUSPSRC_SPI1 (1 << 22)
-#define DAVINCI_SYSCFG_SUSPSRC_UART2 (1 << 20)
+#define DAVINCI_SYSCFG_SUSPSRC_UART0 (1 << 18)
#define DAVINCI_SYSCFG_SUSPSRC_TIMER0 (1 << 27)
struct davinci_syscfg1_regs {
diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c
index 9d0f71b..4e4107a 100644
--- a/board/davinci/ea20/ea20.c
+++ b/board/davinci/ea20/ea20.c
@@ -48,12 +48,12 @@ static const struct pinmux_config spi1_pins[] = {
{ pinmux(5), 1, 5 }
};
-/* UART pin muxer settings */
+/* UART0 pin muxer settings */
static const struct pinmux_config uart_pins[] = {
- { pinmux(0), 4, 6 },
- { pinmux(0), 4, 7 },
- { pinmux(4), 2, 4 },
- { pinmux(4), 2, 5 }
+ { pinmux(3), 2, 7 },
+ { pinmux(3), 2, 6 },
+ { pinmux(3), 2, 4 },
+ { pinmux(3), 2, 5 }
};
#ifdef CONFIG_DRIVER_TI_EMAC
@@ -104,7 +104,7 @@ static const struct lpsc_resource lpsc[] = {
{ DAVINCI_LPSC_AEMIF }, /* NAND, NOR */
{ DAVINCI_LPSC_SPI1 }, /* Serial Flash */
{ DAVINCI_LPSC_EMAC }, /* image download */
- { DAVINCI_LPSC_UART2 }, /* console */
+ { DAVINCI_LPSC_UART0 }, /* console */
{ DAVINCI_LPSC_GPIO },
};
@@ -150,7 +150,7 @@ int board_init(void)
writel(readl(&davinci_syscfg_regs->suspsrc) &
~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C |
DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 |
- DAVINCI_SYSCFG_SUSPSRC_UART2),
+ DAVINCI_SYSCFG_SUSPSRC_UART0),
&davinci_syscfg_regs->suspsrc);
/* configure pinmux settings */
@@ -167,7 +167,7 @@ int board_init(void)
/* enable the console UART */
writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
DAVINCI_UART_PWREMU_MGMT_UTRST),
- &davinci_uart2_ctrl_regs->pwremu_mgmt);
+ &davinci_uart0_ctrl_regs->pwremu_mgmt);
return 0;
}
diff --git a/include/configs/ea20.h b/include/configs/ea20.h
index 48ce945..601990a 100644
--- a/include/configs/ea20.h
+++ b/include/configs/ea20.h
@@ -67,7 +67,7 @@
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
-#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of
UART2 */
+#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of
UART0 */
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
