Fix:
smc91111.c: In function 'smc_phy_configure':
smc91111.c:1194:6: warning: variable 'failed' set but not used
[-Wunused-but-set-variable]
smc91111.c:1190:7: warning: variable 'phyaddr' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk <w...@denx.de>
---
drivers/net/smc91111.c | 8 --------
1 files changed, 0 insertions(+), 8 deletions(-)
diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c
index ba9c67e..9b8236d 100644
--- a/drivers/net/smc91111.c
+++ b/drivers/net/smc91111.c
@@ -1187,18 +1187,12 @@ static void smc_wait_ms(unsigned int ms)
static void smc_phy_configure (struct eth_device *dev)
{
int timeout;
- byte phyaddr;
word my_phy_caps; /* My PHY capabilities */
word my_ad_caps; /* My Advertised capabilities */
word status = 0; /*;my status = 0 */
- int failed = 0;
PRINTK3 ("%s: smc_program_phy()\n", SMC_DEV_NAME);
-
- /* Get the detected phy address */
- phyaddr = SMC_PHY_ADDR;
-
/* Reset the PHY, setting all other bits to zero */
smc_write_phy_register (dev, PHY_CNTL_REG, PHY_CNTL_RST);
@@ -1296,13 +1290,11 @@ static void smc_phy_configure (struct eth_device *dev)
if (timeout < 1) {
printf ("%s: PHY auto-negotiate timed out\n", SMC_DEV_NAME);
- failed = 1;
}
/* Fail if we detected an auto-negotiate remote fault */
if (status & PHY_STAT_REM_FLT) {
printf ("%s: PHY remote fault detected\n", SMC_DEV_NAME);
- failed = 1;
}
/* Re-Configure the Receive/Phy Control register */
--
1.7.6.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
