Sorry, I'll be more precise:
FADS board with mpc8xx and the command to obtain u-boot.bin was:
make FADS860T_config
make
and setting ARCH=powerpc, CROSS_COMPILE=ppc_8xx-
Thanks!
________________________________
Da: Wolfgang Denk <w...@denx.de>
A: Davide Gallo Cassarino <davidega...@yahoo.com>
Cc: "u-boot@lists.denx.de" <u-boot@lists.denx.de>
Inviato: Giovedì 6 Ottobre 2011 10:01
Oggetto: Re: [U-Boot] u-boot problem on FADS board: FEC not working
Dear Davide Gallo Cassarino,
In message <1317883643.25164.yahoomail...@web29706.mail.ird.yahoo.com> you
wrote:
>
> I was able to compile u-boot (I retrieved the last revision by git)
> for FADS board, load it on the board and then to boot it on the board!
Which exact configuration did you use? There are many different
"FADS" boards with MPC8xx and MPC82xx processors, so please be
precise.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
If you fail to plan, plan to fail.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
