Dear Kumar Gala, In message <1316067470-18992-1-git-send-email-ga...@kernel.crashing.org> you wrote: > From: Shengzhou Liu <shengzhou....@freescale.com> > > The P3060QDS is a Freescale reference board for the six-core P3060 SOC. > > P3060QDS Board Overview: > Memory subsystem: > - 2G Bytes unbuffered DDR3 SDRAM SO-DIMM(64bit bus) > - 128M Bytes NOR flash single-chip memory > - 16M Bytes SPI flash > - 8K Bytes AT24C64 I2C EEPROM for RCW > Ethernet: > - Eight Ethernet controllers (4x1G + 4x1G/2.5G) > - Three VSC8641 PHYs on board (2xRGMII + 1xMII) > - Suport multiple Vitesse VSC8234 SGMII Cards in Slot1/2/3 > PCIe: Two PCI Express 2.0 controllers/ports > USB: Two USB2.0, USB1(TYPE-A) and USB2(TYPE-AB) on board > I2C: Four I2C controllers > UART: Supports two dUARTs up to 115200 bps for console > RapidIO: Two RapidIO, sRIO1 and sRIO2 > > Signed-off-by: Shengzhou Liu <shengzhou....@freescale.com> > Signed-off-by: Kumar Gala <ga...@kernel.crashing.org> > --- > board/freescale/common/Makefile | 3 + > board/freescale/common/ics307_clk.c | 21 +- > board/freescale/common/qixis.c | 151 ++++++++++++ > board/freescale/common/qixis.h | 101 ++++++++ > board/freescale/p3060qds/Makefile | 54 ++++ > board/freescale/p3060qds/ddr.c | 281 ++++++++++++++++++++++ > board/freescale/p3060qds/eth.c | 440 > ++++++++++++++++++++++++++++++++++ > board/freescale/p3060qds/fixed_ddr.c | 214 +++++++++++++++++ > board/freescale/p3060qds/p3060qds.c | 239 ++++++++++++++++++ > board/freescale/p3060qds/p3060qds.h | 30 +++ > boards.cfg | 2 + > doc/README.p3060qds | 111 +++++++++ > include/configs/P3060QDS.h | 39 +++ > include/configs/corenet_ds.h | 4 + > 14 files changed, 1682 insertions(+), 8 deletions(-) > create mode 100644 board/freescale/common/qixis.c > create mode 100644 board/freescale/common/qixis.h > create mode 100644 board/freescale/p3060qds/Makefile > create mode 100644 board/freescale/p3060qds/ddr.c > create mode 100644 board/freescale/p3060qds/eth.c > create mode 100644 board/freescale/p3060qds/fixed_ddr.c > create mode 100644 board/freescale/p3060qds/p3060qds.c > create mode 100644 board/freescale/p3060qds/p3060qds.h > create mode 100644 doc/README.p3060qds > create mode 100644 include/configs/P3060QDS.h
Checkpatch says: WARNING: static const char * array should probably be static const char * const #1569: FILE: board/freescale/p3060qds/p3060qds.c:84: + static const char *freq[] = {"100", "125", "Reserved", Please clean up and resubmit. Thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Conceptual integrity in turn dictates that the design must proceed from one mind, or from a very small number of agreeing resonant minds. - Frederick Brooks Jr., "The Mythical Man Month" _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot