Reported-by: Michael Jones <michael.jo...@matrix-vision.de>
Signed-off-by: Wolfgang Denk <w...@denx.de>
---
README | 13 +++++--------
1 files changed, 5 insertions(+), 8 deletions(-)
diff --git a/README b/README
index e0a4d53..c5cfb13 100644
--- a/README
+++ b/README
@@ -627,7 +627,7 @@ The following options need to be configured:
initialised to a buffer of size CONFIG_PRE_CON_BUF_SZ
bytes located at CONFIG_PRE_CON_BUF_ADDR. The buffer is
a circular buffer, so if more than CONFIG_PRE_CON_BUF_SZ
- bytes are output before the console is initialised, the
+ bytes are output before the console is initialised, the
earlier bytes are discarded.
'Sane' compilers will generate smaller code if
@@ -2264,9 +2264,9 @@ FIT uImage format:
- Standalone program support:
CONFIG_STANDALONE_LOAD_ADDR
- This option allows to define board specific values
- for the address where standalone program gets loaded,
- thus overwriting the architecutre dependent default
+ This option defines a board specific value for the
+ address where standalone program gets loaded, thus
+ overwriting the architecture dependent default
settings.
- Frame Buffer Address:
@@ -2276,13 +2276,10 @@ FIT uImage format:
address for frame buffer.
Then system will reserve the frame buffer address to
defined address instead of lcd_setmem (this function
- grab the memory for frame buffer by panel's size).
+ grabs the memory for frame buffer by panel's size).
Please see board_init_f function.
- If you want this config option then,
- please define it at your board config file
-
- Automatic software updates via TFTP server
CONFIG_UPDATE_TFTP
CONFIG_UPDATE_TFTP_CNT_MAX
--
1.7.6.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
