Hi Simon, Le 22/09/2011 00:40, Simon Glass a écrit : > This adds to the basic clock functionality already available. The concept > of a peripheral ID is introduced, and all peripheral clock access is done > using this ID. > > Functions are provided to start, query and adjust peripheral clocks, > including automatic selection of the best available clock based on the > requested rate (this replaces hard-coded divisors). > > On the pinmux side we can now select functions for pin groups using the > new pinmux_set_func() function. > > Expanded functions are provided to adjust and query PLL clocks. > > With a full compliment of clock and pinmux functions, it should no longer > be necessary for board/driver code to directly access clock registers. This > change removes all such accesses. > > This functionality will be used for I2C, SPI, LCD, USB, keyboard, NAND and > other drivers for Tegra2. > > At then end is a patch to enable MMC on Seaboard, to make it all worthwhile. > > Note: These patches include a definition of assert() which I will happily > remove if the one sent upstream is accepted. > > Changes in v2: > - Remove assert() which is now in common.h
Series applied to u-boot-arm/master, thanks! Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot