On Wednesday, October 12, 2011 02:30:57 AM Simon Glass wrote: > Hi Marek, > > On Wed, Oct 5, 2011 at 10:05 AM, Marek Vasut <marek.va...@gmail.com> wrote: > > On Wednesday, October 05, 2011 04:10:56 PM Simon Glass wrote: > >> Hi Marek, > >> > >> On Fri, Sep 30, 2011 at 5:12 PM, Marek Vasut <marek.va...@gmail.com> wrote: > >> > The Toradex T20 module uses 13MHz Xtal, so make the Xtal speed > >> > configurable. > >> > > >> > Signed-off-by: Marek Vasut <marek.va...@gmail.com> > >> > Cc: Simon Glass <s...@chromium.org> > >> > Cc: Ben Warren <biggerbadder...@gmail.com> > >> > Cc: Tom Warren <twarren.nvi...@gmail.com> > >> > Cc: Stephen Warren <swar...@nvidia.com> > >> > --- > >> > arch/arm/cpu/armv7/tegra2/ap20.c | 9 +++++++-- > >> > 1 files changed, 7 insertions(+), 2 deletions(-) > >> > > >> > diff --git a/arch/arm/cpu/armv7/tegra2/ap20.c > >> > b/arch/arm/cpu/armv7/tegra2/ap20.c index dc5f984..71d9f26 100644 > >> > --- a/arch/arm/cpu/armv7/tegra2/ap20.c > >> > +++ b/arch/arm/cpu/armv7/tegra2/ap20.c > >> > @@ -31,6 +31,11 @@ > >> > #include <asm/arch/scu.h> > >> > #include <common.h> > >> > > >> > +/* The default XTal is 12MHz, some boards might use 13MHz one though > >> > */ +#ifndef CONFIG_SYS_TEGRA2_XTAL_MHZ > >> > +#define CONFIG_SYS_TEGRA2_XTAL_MHZ 12 > >> > +#endif > >> > + > >> > u32 s_first_boot = 1; > >> > > >> > void init_pllx(void) > >> > @@ -46,8 +51,8 @@ void init_pllx(void) > >> > /* Set PLLX_MISC */ > >> > writel(1 << PLL_CPCON_SHIFT, &pll->pll_misc); > >> > > >> > - /* Use 12MHz clock here */ > >> > - reg = PLL_BYPASS_MASK | (12 << PLL_DIVM_SHIFT); > >> > + /* Use 13MHz clock here */ > >> > >> Change comment? > >> > >> > + reg = PLL_BYPASS_MASK | (CONFIG_SYS_TEGRA2_XTAL_MHZ << > >> > PLL_DIVM_SHIFT); reg |= 1000 << PLL_DIVN_SHIFT; > >> > writel(reg, &pll->pll_base); > >> > > >> > -- > >> > 1.7.5.4 > >> > >> Regards, > >> Simon > > > > Hi Simon, I'll probably also change the board.c to support this. But > > then, can't the board.c be moved to arch/arm/cpu/armv7/tegra... and it's > > functions exported via standard header ? Cheers > > Which board.c do you mean and which change do you need to make?
Hi Simon, board/nvidia/common/board.c same as this patch does . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot