On Wed, Oct 12, 2011 at 3:23 PM, John Rigby <john.ri...@linaro.org> wrote:
> My tree has the precalculated ddr timing patch: > > U-Boot/SPL: omap4: Make ddr pre-calculated timings as default. > > All ddr configurations(geometry/timings) are done automatically > by detecting the device connected at run time. Though this > is a useful feature, making this as a default setting increases > the code size by about 2K bytes. This is quite big, especially > in the case of SPL which runs from a smaller SRAM. So do not > use this feature as the default setting, instead use the > precalculated tables. > > Signed-off-by: sricharan <r.sricha...@ti.com> > > But you probably picked that up with the spl size fix from the same author. I did, and the mmc/fat fix also makes the same change so there is an easily fixable conflict when applying all three patches. >> Is your tree based on v2011.09? Is it public? > > My tree has a bunch of extra patches on top and is based on rc2. I > know it works: > > http://git.linaro.org/gitweb?p=boot/u-boot-linaro-stable.git;a=summary OK, I will give that a try first. > My -next tree has had no testing because I only just put it together. > It is nearly identical to the above but rebased to v2011.09 final: > > http://git.linaro.org/gitweb?p=boot/u-boot-linaro-next.git;a=summary If your rc2 based branch works then I will try this one too to see if something broke subsequently. Thanks! Steve _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot