In board_init_f() the gd->bd pointer is not valid when dram_init() is called.
This only avoids dying because DRAM is at zero on Tegra2. The common ARM
routine sets up the banks in the same way anyway, so we can just remove this
code.
Signed-off-by: Simon Glass <s...@chromium.org>
---
arch/arm/cpu/armv7/tegra2/board.c | 10 +---------
1 files changed, 1 insertions(+), 9 deletions(-)
diff --git a/arch/arm/cpu/armv7/tegra2/board.c
b/arch/arm/cpu/armv7/tegra2/board.c
index 04c1683..91e0a6f 100644
--- a/arch/arm/cpu/armv7/tegra2/board.c
+++ b/arch/arm/cpu/armv7/tegra2/board.c
@@ -57,16 +57,8 @@ unsigned int query_sdram_size(void)
int dram_init(void)
{
- unsigned long rs;
-
/* We do not initialise DRAM here. We just query the size */
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = gd->ram_size = query_sdram_size();
-
- /* Now check it dynamically */
- rs = get_ram_size(CONFIG_SYS_SDRAM_BASE, gd->ram_size);
- if (rs)
- gd->bd->bi_dram[0].size = gd->ram_size = rs;
+ gd->ram_size = query_sdram_size();
return 0;
}
--
1.7.3.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
