ARCH_DMA_MINALIGN will be used to allocate DMA buffers that are aligned correctly. In all current cases this means that the DMA buffer will be aligned to at least the L1 data cache line size of the configured architecture. If the board configuration file does not specify the architecture L1 data cache line size then the maximum line size of the architecture is used to align DMA buffers.
Signed-off-by: Anton Staaf <[email protected]> Cc: Mike Frysinger <[email protected]> Cc: Lukasz Majewski <[email protected]> Cc: Wolfgang Denk <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Ilya Yanok <[email protected]> Cc: Laurence Withers <[email protected]> --- include/common.h | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-) diff --git a/include/common.h b/include/common.h index a55600b..3a6ef0e 100644 --- a/include/common.h +++ b/include/common.h @@ -813,6 +813,14 @@ int cpu_release(int nr, int argc, char * const argv[]); #define ALIGN(x,a) __ALIGN_MASK((x),(typeof(x))(a)-1) #define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask)) +/* + * ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture. It + * is used to align DMA buffers. + */ +#ifndef __ASSEMBLY__ +#include <asm/cache.h> +#endif + /* Pull in stuff for the build system */ #ifdef DO_DEPS_ONLY # include <environment.h> -- 1.7.3.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
