On 10/21/2011 09:21 AM, Thomas Chou wrote: > On 10/17/2011 11:36 PM, Joachim Foerster wrote: >> This driver may handle multiple PIO cores and thus needs to be >> setup by calling the altera_pio_init() function within the early >> board setup routine. >> >> The driver comes with some extras, see below the copyleft header. >> >> Signed-off-by: Joachim >> Foerster<joachim.foers...@missinglinkelectronics.com> >> --- >> arch/nios2/include/asm/gpio.h | 13 +- >> board/altera/nios2-generic/custom_fpga.h | 1 + >> board/altera/nios2-generic/nios2-generic.c | 8 + >> drivers/gpio/Makefile | 1 + >> drivers/gpio/altera_pio.c | 299 ++++++++++++++++++++++++++++ >> 5 files changed, 320 insertions(+), 2 deletions(-) >> create mode 100644 drivers/gpio/altera_pio.c > > Hi Joachim, > > Please fix these warning. Thanks. > > $ ./MAKEALL nios2-generic > Configuring for nios2-generic board... > altera_pio.c: In function `altera_pio_info': > altera_pio.c:189: warning: ` ' flag used with `%u' printf format
Ok, I'll use %d - in this case it is the same. Does anybody know why %u warns about space-flag usage? Is space-flag + %u indeed evil ? > Otherwise, > Tested-by: Thomas Chou <tho...@wytron.com.tw> > > Best regards, > Thomas Thanks for reviewing. -- Joachim Foerster Missing Link Electronics http://www.missinglinkelectronics.com Office EU: +49 (731) 141-149-0 Office US: +1 (408) 457-0700 email: joachim.foers...@missinglinkelectronics.com _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot